Find the air horsepower of an industrial fan that delivers 26 cu.m/s of air through a 1 m x 1.2 m duct3; pressure of 127 mm of water; air temperature is 21 C and barometric pressure is 760 mm HG. 43.18 kW 42.62 kW 38.12 kW 39.72 kW

Find the air horsepower of an industrial fan that delivers 26 cu.m/s of air through a 1 m x 1.2 m duct3; pressure of 127 mm of water; air temperature is 21 C and barometric pressure is 760 mm HG. 43.18 kW 42.62 kW 38.12 kW 39.72 kW

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Solve the ff. The discharge pressure of an air compressor is 5 times the suction pressure. If the volume flow at suction is 0.7m3/s and discharge volume flow of 0.2217m3/s, what is the compressor power(hp) if suction pressure is 100kpa. Ans. 191.72 A double acting air compressor has a cylinder dimension of 50cm x 60cm, 750rpm will have a volume displacement (m3/s) of: Ans. 2.945 A pump has a specific speed of 45 and 600rpm when it delivers 0.01m3/s. Find the head developed by the pump in ft. Ans. 926.07
A single-stage centrifugal pump having a suction pipe 254 mm in diameter anda discharge pipe diameter of 5 inches is being tested and found out to discharge 48 lps ofwater. A pressure gage connected to the inlet pipe reads 118 mm Hg vacuum and adischarge gage reads 150 kPa at a distance 100 cm above the point where the inletpressure was measured. If the kW rating of the driving motor is 12 kW, calculate a) thepump efficiency. b) if this pump runs at 1800 rpm, what will be the new discharge rate,head, and power developed if the pump speed was increased to 3600 rpm? Assumeconstant efficiency. c) Determine the pump type.
A petrolengine has mechanical efficiency 0.8 and lower calorific value of ispoots 44.2 MJ/kg. The engine bore 0.06 m and stroke of 0.08 m. The engine speed of 2000 rom. The consumption of fuel about 8 liter/h and the brake welght is 200N. Take the density of fuel as 750 kg Im3 and torque arm of A00 mm Find the specific fuel consumption.
A single-stage centrifugal pump having a suction pipe 254 mm in diameter anda discharge pipe diameter of 5 inches is being tested and found out to discharge 48 lps ofwater. A pressure gage connected to the inlet pipe reads 118 mm Hg vacuum and adischarge gage reads 150 kPa at a distance 100 cm above the point where the inletpressure was measured. If the kW rating of the driving motor is 12 kW, calculate: a) the pump efficiency. b) if this pump runs at 1800 rpm, what will be the new discharge rate,head, and power developed if the pump speed was increased to 3600 rpm? Assumeconstant efficiency. c) Determine the pump type.
A double acting air compressor has a cylinder dimensions of 50 cm x 60 cm, 650 rpm will have a volume displacement of:A. 4.12 m3/s
Question. A boiler unit has forced draught fan maintaining draught of 90 mm of water column while discharging 38 m/s through outlet section of 1.9m² area. Ambient temperature is 300 K and assume mass of 1 m³ of air at NTP as 1.293 kg to find out power of motor of forced draught fan if for efficiency is 80%. Determine the power consumption if FD fan is substituted by ID fan of similar efficiency considering flue gas temperature of 450 K
EX.1 An axial flow pump with an impeller rotor diameter of 30 cm handles water at a rate of 2.7 m?/minute running at 1500 rpm. The energy input is e ——T e T ‘a 125 J/kg and Total to Total efficiency is 0.75. If a geometrically similar pump has a diameter of 20 cm running at 3000 rpm, find its: i) Flow ratei) input power.
An aqueduct is required to supply water to the community.Data: Families = 12 Average members per family = 3 people Breakfast, lunch and dinner = 15 total liters / family Showers = 10lt / person, one daily shower Kitchen wash = 13lts / day Total distance of the pipeline to the storage tank = 1200 meters Total height H from the pump point to delivery to the tank = 70 meters Determine: Estimation of the total volume of the recommended tank, an autonomy of at leas 2 days of storage. It is required to propose a pump that allows at least filling the tank between 5 to 12 hours operation, it must include details of the pump, as well as its curve Image: schematic detail of the proposed system
dp 1. It shows that the behavior of fluid is A From the equation stated, show the formula for mass flow rate AVp = c. :C.
Find the air horsepower of the AHU fan that delivers 25,000 CFM through a 4ft x 4ft duct with a static pressure of 5 inches of water. Air temperature is 70 deg F and a barometric pressure of 760 mmHg.
A petrol engine has mechanical efficiency 0.8 and lower calorific value of 44.2 MJ / kg. The engine bore 0.06 m and stroke of 0.08 m. The engine speed of 2000 rpm. The consumption of fuel about 8 liter / h and the brake weight is 200 N. Take the density of fuel as 750 kg / m3 and torque arm of 400 mm.Find the specific fuel consumption. *
Please solve it correctly,Urgent. Question: The discharge pressure of a water pump is 9, 000 kPa. The temperature is 150 deg deg C and density is 917 kg/m3. What is the equivalent pump head in meters? A. 11.005 m B. 1,000.5 m C. 1,050.5m D. 1, 100.5 m