Example: A 100 hp, 250 V compounded de motor with compensating windings has an internal resistance, including the series winding, of 0.04 2. There are 1000 turns per pole on the shunt filed and 3 turns per pole on the series winding. The machine is shown in Figure 8-27, and its magnetization curve is shown in Figure 8-9. At no load, the field resistor has been adjusted to make the motor run at 1200 r/min. The core, mechanical, and stray losses may be neglected. R$ Ls IL www ww NF 1000 turn/pole NSE=3 turn/pole V₁= 250V EA LF a) What is the shunt filed current in this machine at no load? b) If the motor is cumulatively compounded, find its speed when IA = 200 A. c) If the motor is differentially compounded, find its speed when IA = 200 A. 0.04 92 C Radj RF

Example: A 100 hp, 250 V compounded de motor with compensating windings has an internal resistance, including the series winding, of 0.04 2. There are 1000 turns per pole on the shunt filed and 3 turns per pole on the series winding. The machine is shown in Figure 8-27, and its magnetization curve is shown in Figure 8-9. At no load, the field resistor has been adjusted to make the motor run at 1200 r/min. The core, mechanical, and stray losses may be neglected. R$ Ls IL www ww NF 1000 turn/pole NSE=3 turn/pole V₁= 250V EA LF a) What is the shunt filed current in this machine at no load? b) If the motor is cumulatively compounded, find its speed when IA = 200 A. c) If the motor is differentially compounded, find its speed when IA = 200 A. 0.04 92 C Radj RF

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Example: A 100 hp, 250 V compounded de motor with compensating windings has an internal resistance, including the series winding, of 0.04 2. There are 1000 turns per pole on the shunt filed and 3 turns per pole on the series winding . The machine is shown in Figure 8-27, and its magnetization curve is shown in Figure 8-9. At no load, the field resistor has been adjusted to make the motor run at 1200 r/min. The core, mechanical, and stray losses may be neglected. A RA Rs Ls NF=1000 turn/pole 0.04 2 Radi NSE=3 turn/pole RF Vr= 250V EA • Cumulatively compounded LF - Differentially compounded a) What is the shunt filed current in this machine at no load? b) If the motor is cumulatively compounded, find its speed when IA = 200 A. c) If the motor is differentially compounded, find its speed when IA = 200 A. 31 Dr Thamir Hassan ATYIA Tikrit University EMI DC Machines_MotorPart2
The DC shunt generator with the terminal voltage 350 V, armature drop 7 V and the each brush drop 2 V, then the value of generated emf is
8. A 3-phase induction motor is running at 2% slip. If the input to rotor is 1000 W, then mechanical power developed by the motor is ............ (i) 20 W (iii) 500 W (ii) 980 W (iv) 200 W
The field windings of the series motor have a resistance of 120 ohms at 15-degree C. After running for two hours, the resistances increase to 140 ohms. If the temperature coefficient of the windings at 0 degree C is 0.004, find the new windings of the temperature
the field windings of a series motor has a resistance of 120 ohms at 15° c. after running for 2 hours, the resistance has increases to 140 ohms. if the temperature coefficient of the windings at 0°C is 0.004, find the new temperature of the windings
A dc generator is run at 500 rpm. The eddy current losses and hysteresis losses are found to be 100 and 200 W, respectively. At what speed will it be run to reduce the core losses by 20%?
2- A 4-pole, wave-wound d.c. shunt generator has an armature winding consisting of 300 turns each of 0.0020. The armature resistance is a) 0.152 b)0.62 c) 0.30 d) none of above
At rated voltage, a 125 kw, 300-V long shunt compound system provides power with a stray power loss of 3.69 kW. The winding resistors are as follows: armature=0.023, series field=0.04, shunt field=75. Under this condition, find the efficiency of the system.
What are the following statements are true for a three-phase induction motor? I. Three-phase induction motor stator winding is fed from a single-phase supply II. Stator carries a three-phase winding III. Rotor carries a short circuited winding a. I,II and III b. I only c. I and II only d. II and III
A four-pole, wave-wound generator has 220 coils of 10 turns each. The resistance of each turn is 0.02 2. Find the resistance of the armature winding.
A wave wound armature of an eight-pole DC shunt generator has 51 slots, each
A four-pole induction motor drives a load at 2478 rpm. This is to be accomplished by using an electronic converter to convert a 400-V dc source into a set of three-phase ac voltages. Part A Find the frequency required for the ac voltages assuming that the slip is 4 percent. The load requires 2 hp. Express your answer to three significant figures and include the appropriate units. f= Submit Part B Value I = HA Request Answer Submit If the dc-to-ac converter has a power efficiency of 90 percent and the motor has a power efficiency of 80 percent, estimate the current taken from the dc source. Express your answer to three significant figures and include the appropriate units. HÅ Value Units Request Answer ? Units ?