Discover ambiguities or omissions in the following statement of the requirements for part of a drone system intended for search and recovery: The drone, a quad chopper, will be very useful in search and recovery operations, especially in remote areas or in extreme weather conditions. It will click high-resolution images. It will fly according to a path preset by a ground operator, but will be able to avoid obstacles on its own, returning to its original path whenever possible. The drone will also be able to identify various objects and match them to the target it is looking for.

Discover ambiguities or omissions in the following statement of the requirements for part of a drone system intended for search and recovery: The drone, a quad chopper, will be very useful in search and recovery operations, especially in remote areas or in extreme weather conditions. It will click high-resolution images. It will fly according to a path preset by a ground operator, but will be able to avoid obstacles on its own, returning to its original path whenever possible. The drone will also be able to identify various objects and match them to the target it is looking for.

Principles of Information Systems (MindTap Course List)

12th Edition

ISBN:9781285867168

Author:Ralph Stair, George Reynolds

Publisher:Ralph Stair, George Reynolds

Chapter8: Electronic And Mobile Commerce

Section8.5: Ethical & Societal Issues: Abilityone: E-commerce Not Just For The Sighted

Problem 2CTQ

See similar textbooks

Similar questions

Code requirements: A robot is positioned on an integral point in a two-dimensional coordinate grid (xr, yr). There is a treasure that has been placed at a point in the same grid at (xt, yt). All x’s and y’s will be integral values. The robot can move up (North), down (South), left (West), or right (East). Commands can be given to the robot to move one position in one of the four direction. That is, “E” moves a robot one slot East (to the right) so if the robot was on position (3, 4), it would now be on (4, 4). The command N would move the robot one position north so a robot at position (4, 4) would be at (4, 5). Because the robot cannot move diagonally, the shortest distance between a robot at (xr, yr) and a treasure at (xt, yt) is | xr – xt | + | yr - yt | = ShortestPossibleDistance Write a recursive program which determines all the unique shortest possible paths from the robot to the treasure with the following stipulation: The robot may never move in the same direction more than…
Figure below shows an aerial view of the car park managed by a parking company. You have been approached by the company to develop a computer vision system that can be used to identify vacant parking lots. Figure 3 iv) Another common issue faced by car park visitors is the difficulty in locating their vehicle when the car park is full. You are asked to extend the current system to be able to locate the general location of a specific vehicle. Describe two modifications (or approaches) that can be applied to the current system to locate a specific vehicle. In your answer, also discuss the factors that would affect the performance of the system with your proposed approach.
Application Consideration: Why might a meta-algorithmic (or hybrid) approach to storing signals or images have a particularly high percent improvement (please provide an example)?
You need to plan an aerial photography campaign to survey a 4km x 4km area located at an average elevation of 10m above sea level. Your application requires a GSD of 9 cm, an endlap of 60% and a sidelap of 30%. You use a digital camera equipped with a 7500x7500 array of detectors (produces an image that has 7500x7500 pixels) and that has a focal length of 100 mm. The physical size of each detector is 9 mm. The aircraft flies at a ground speed of 160 km/hr. Determine the flight height above sea level Determine the number of frames that you need to acquire (number of frames / flight line and number of flight lines). To do this: Determine the ground coverage of one photo (frame) Determine the ground separation between the principal points of 2 consecutive frames Knowing that the distance between 2 consecutive principal points is determined by the interval of time between 2 shots, calculate the value to set camera’s intervalometer at. Note that the intervalometer is the timer you set on…
Figure below shows an aerial view of the car park managed by a parking company. You have been approached by the company to develop a computer vision system that can be used to identify vacant parking lots. Figure 3 ii) With reference to the figure given above, place the camera(s) to acquire video outdoor area of the car park. Justify your answer. explain how you would image samples of the
Block diagram: A Segway16 Personal Transporter (PT) is a two-wheeled vehicle in which the human operator stands vertically on a platform. As the driver leans left, right, forward, or backward, a set of sensitive gyroscopic sensors sense the desired input. These signals are fed to a computer that amplifies them and commands motors to propel the vehicle in the desired direction. One very important feature of the PT is its safety: The system will maintain its vertical position within a specified angle despite road disturbances, such as uphills and downhills or even if the operator over-leans in any direction. Draw a functional block diagram of the PT system that keeps the system in a vertical position. Indicate the input and output signals, intermediate signals, and main subsystems. (http://segway.com)
TOOLS REQUIRED: MATLAB environment Answer the following Perform the simulation using MATLAB environment (Image Processing toolbox) SET A Question 1. Write the appropriate program to convert a video into different frames and find the total number of frames in the video used 2. Run the simulation and get the output verified. Question 3. Interpret the output of the basic image operations.
Compare and contrast the use of coordinates vs relative placement (top, left, right, center, etc.).
Describe the elements to consider while choosing the best scanning device for a specific task.Is it possible for you to avoid being scanned by a scanner? Explain.
Motion detection and face detection are computer technologies widely used in a variety of applications related to the digital image. (a) Differentiate between motion detection and face detection. (b) Provide any 3 applications of motion detection and tracking.
(d) Explain the two algorithms used to reconstruct the image from the telescope data. (e) What parameters were required for the GRMHD simulations to generate an image? (f) Explain the physical origins of the features (central dark region, ring, shadow). (g) How can the image resolution be increased in future observations?
You are required to design and develop a computer vison system that can be used to recognize handwritten digits automatically. Some of the handwritten digits (sample images) that the system would need to recognize are shown in Figure 1(e). 0 6 73 Figure 1(e) Explain the steps that you will carry out to develop such a system, as well as how your system will be applied to recognize the handwritten digits.