Consider two nodes, A and B are attached to opposite ends of an 1200 meter cable with signal propagation speed is 2 x 10^8 m/sec. Frame size used by both nodes is 1500 bits including header and preambles. Assume transmission rate is 100 Mbps and there are four switches between node A and B each insert 20 bit delay as a processing time in addition to store and forward delay. If only A has packet to send, then the time taken to reach A's packet at B is?

Consider two nodes, A and B are attached to opposite ends of an 1200 meter cable with signal propagation speed is 2 x 10^8 m/sec. Frame size used by both nodes is 1500 bits including header and preambles. Assume transmission rate is 100 Mbps and there are four switches between node A and B each insert 20 bit delay as a processing time in addition to store and forward delay. If only A has packet to send, then the time taken to reach A's packet at B is?

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.10: Exponential Queues In Series And Open Queuing Networks

Problem 8P

See similar textbooks

Similar questions

Frames of 1000 bits are sent over a 106 bps duplex link between two hosts. The propagation time is 25 ms. Frames are to be transmitted into this link to maximally pack them in transit (within the link). 1.1 What is the minimum number of bits (1) that will be required to represent the sequence numbers distinctly? Assume that no time gap needs to be given between transmission of two frames.
A TCP connection is established through 10 wireless hops in an acoustic underwater ad hoc network. Assume that each hop is 100 meter in the average, acoustic signals travel 1500 meter per second, 10 kilobit data can be sent per second over a link, the source node has one megabyte of data to send, the receiver window size is 64 kilobytes, the maximum segment size is 1 kilobyte and the average processing delay for routing at each node is one millisecond. Assume also that the following segments do not reach the destination: 67, 112, 137. What would be the average utilization of the links for this connection if there is not another communications through them? Explain an alternative approach to increase the bandwidth utilization?
Consider two hosts S and R connected directly by a link. A link has a transmission speed of 107 bits/sec. It uses data packets of size 400 bytes. Data needed to transmitted is 400 bytes. Length of the link is 600 km and the propagation speed are 3 × 108 meter per second. T is the transmission delay and P is the propagation delay. The propagation delay in millisecond and transmission delay in microsecond respectively are
Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive 10 Mbps links of 1000 km length each.Assume that the signal propagation speed on both links is 2.5 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1500 bytes and that Computer A fills each packet to the max, if possible. If transmission starts at time t=0, at which time (in seconds) does the first bit arrive at the switch connecting link 1 and link 2?
2. Consider a bus-topology network with five stations. A reservation access method is used. Each station has infinite data to transmit. Each reservation slot has 10 microseconds (note that 1 microsecond = 106 second). For each station, one data transmission sends 1000 bits. The transmission rate over the medium is 10 Mbps. For a station, which is its throughput (in unit "Mbps")?
Assume that the propagation speed in a coaxial cable is 2 ∙108 m/s a. Packets are transmitted using the ABP (alternate bit protocol) over a full-duplex 5-km coaxial cable with a 5 Mbps transmission rate. The packets and ACKs are 1500 bits long. The transmitter and receiver use a CRC chip and their processing time is negligible. How many packets are transmitted every second when there is no transmission error? b. Five transmission lines identical to the one discussed in a) are connected in series. A buffer is used at each connection between the links to store packets as required. How many packets will go through the five lines every second when there are no transmission errors? Now assume that a packet or its acknowledgement is corrupted on any given link with probability p. What is the new packet transmission rate through the five links? Comment. Assume the processing delays and queuing delays for both ends are negligible.
Computer A is sending a 10 MByte long file to Computer B via packet-switching over two consecutive 100 Mbps links of 2000 km length each.Assume that the signal propagation speed on both links is 2 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1480 bytes and that Computer A fills each packet to the max, if possible. If transmission starts at time t=0, at which time (in seconds) does the first bit arrive at the switch connecting link 1 and link 2? (What is the propagation delay for link 1?)
A link has a transmission speed of 106 bits/sec. It uses data packets of size 1000 bytes each. Assume that the acknowledgment has negligible transmission delay, and that its propagation delay is the same as the data propagation delay. Also assume that the processing delays at nodes are negligible. The efficiency of the stop-and-wait protocol in this setup is exactly 25%. The value of the one-way propagation delay (in milliseconds) ?
Let the two host X and Y connected via a packet switch with 107 bits per second links. Switch is placed at 50 km from X. X and Y are located at 100 Kilometer apart also the propagation speed along the link is 2 × 108 m/s. The switch begins forwarding a packet after 0.1 milliseconds it receives the packet. If 1000 bytes of File are needed to be transmitted and each packet size is 500 bytes, the time elapsed between the transmission of the first bit of data and the reception of the last bit of the data in millisecond is
Computer A is sending a 100 kByte long file to Computer B via packet-switching over two consecutive 10 Mbps links of 1000 km length each.Assume that the signal propagation speed on both links is 2.5 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1500 bytes and that Computer A fills each packet to the max, if possible. How "long" (in meters) is one bit on link 1?
A packet with 88MB long is generated at node A and sent to node C through node B. The distance betẃeen A and B is 6500km, distance between B and C is 880km in this arrangement. Data rate between A and B is 100kbs. The propagation delay is 2.9µ/km. Determine the minimum data required between data rate required between node B and C so that the buffer of node B are not flooded.
Consider the following scenario: Frames of 12000 bits are sent over a 400kbps channel using a satellite whose propagation delay is 270ms. Acknowledgements are always piggybacked onto data frames. (That is, in the case of stop-and-wait, the next frame cannot be transmitted until the entire frame containing the acknowledgement is received.) Five-bit sequence numbers are used. What is the maximum achievable channel utilization for (a) Stop-and-wait. (b) Protocol 5 (i.e., Go Back N). (c) Protocol 6 (i.e., Selective Repeat)