. Calculate the annual cost of slaked lime and soda for treatingCERING70,000 litres of water per day, if the water contains the following impuritiesMg(HCO),CaSO,MgSO4Sio,CACO,= 280 ppm- 100 ррт= 35 ppm110 ppm%3DNaCl- 138 рpт= 80 ppmMgCl,Fe,0,Purity of slaked lime is 85% and that of soda is 100%. Slaked lime costs 780per quintal and soda for ? 400 per quintal.[Atomic weights in gm: Ca = 40, Mg = 24, S = 32, Cl = 35.5, C = 12, O = 16,Na = 23, Fe = 56, and Si = 28].= 55ppm= 40 ppm.%3D%3D%3D

Answered: Image /qna-images/answer/e828fafb-6d58-46cc-b405-6f2acad6b778.jpg

CERING Calculate the annual cost of slaked lime and soda for treatine 70,000 litres of water per day, if the water contains the following impurities Mg(HCO), CaSO, MBSO4 SiO, - 100 ppт CACO, = 280 ppm = 35 ppm %3D = 110 ppm 3 80 ppт NaCl MgCl, Fe,0, Purity of slaked lime is 85% and that of soda is 100%. Slaked lime costs 80 per quintal and soda for 400 per quintal. [Atomic weights in gm: Ca 40, Mg = 24, S = 32, Cl = 35.5, C = 12, 0 = 16, Na = 23, Fe = 56, and Si = 28]. = 138 ppm = 55 ppm = 40 ppm. %3D %3D %3D %3D

CERING Calculate the annual cost of slaked lime and soda for treatine 70,000 litres of water per day, if the water contains the following impurities Mg(HCO), CaSO, MBSO4 SiO, - 100 ppт CACO, = 280 ppm = 35 ppm %3D = 110 ppm 3 80 ppт NaCl MgCl, Fe,0, Purity of slaked lime is 85% and that of soda is 100%. Slaked lime costs 80 per quintal and soda for 400 per quintal. [Atomic weights in gm: Ca 40, Mg = 24, S = 32, Cl = 35.5, C = 12, 0 = 16, Na = 23, Fe = 56, and Si = 28]. = 138 ppm = 55 ppm = 40 ppm. %3D %3D %3D %3D

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

4. Lime and soda process is to be designed for the water analysis presented below, The quantity of water to be treated is 12 MGD. Estimate the total hardness, carbonate hardness and non-carbonate hardness. Determine the amount of lime and soda to soften the water to a final hardness of 95 moA as CaCO, Estimate the annual cost of softening if the cost of dry lime (CaO) is a dime per kilogram and cost of soda ash (Na-CO,) is 20 cents per kilogram (assume both compounds to be 90% pure). (AW: Ca-40, Mg-24.3, Na-23, C-12,0-16) acl Constituent mgl mg/las C&CO, Ca 12 Alkalinity CO2 150 Show transcribed image text
For a natural raw water containing the following water quality in the table. Check lecture 05 slides on page 52 to determine how much slaked lime is needed remove all hardness. Atomic weight or molecular Concentration weight (g/mol) 120 mg/L 100 mg/L as CaCO3 25 meg/L Ca2+ 40 Mg2+ HCO3 24 61 O A. 5 meq/L О В. 700 mg-СаСОЗ/L O C. 15 meq/L O D. No lime is needed.
You are asked to design a water softening system to bring following water to a final hardness if 75.0 mg/L as CaCO3. The ion concentrations reported below are all mg/L as CaCO3. Ca2+ = 240.00; Mg2+ = 90.0; HCO3- = 268.0; and CO2= 18.0 The total lime required and initial NCH are nearly 1. 330 and 268 mg/L as CaCO3 2. 376 and 62 mg/L as CaCO3 3. 330 and 27 mg/L as CaCO3 4. 376 and 268 mg/L as CaCO3
Problem 6-13) Determine the lime and soda ash dose, in mg/L as CaCO3, to soften the following water to a final hardness of 80 mg/L as CaCO3. The ion concentrations reported below are all mg/L as CaCO3: Ca+2 = 120; Mg+2 = 30, HCO3- = 70, CO2 = 10.
A lime-soda softening plant treats a flow of 150 MGD, and the water has a hardness of 225 mg/ℓ as CaCO3, an alkalinity of 178 mg/ℓ as CaCO3, a Mg+2 ion content of 39 mg/ℓ, and 4 mg/ℓ of CO2. The commercial grade of quicklime has a purity of 85%, and the soda ash has a purity of 95%. Determine a. The pounds of quicklime and soda ash required per million gallons. b. The tons of quicklime and soda ash required per month if a month is considered to be 30 days.
Determine the lime and soda ash dose, in mg/L as CaCO3, to soften the following water to a final hardness of 80 mg/L as CaCO3. The ion concentrations reported below are all mg/L as CaCO3: Ca2+ = 120, Mg2+ = 30, HCO3 - = 70, CO2 = 10
In a laboratory we are doing a series of tests on a sample of aggregate. This sample has the wet weight of 586.3 gr and dry weight of 513.9 gr. If the absorption of this aggregate is measured as 2.23%. Calculate the percent of free water in the original wet sample.
A water with low alkalinity of 20 mg/L as CaCO3 will be treated with the alum lime coagulation. Alum dosage is 75 mg/L. Determine the lime dosage needed to react with alum.
2) Two aggregates (Al and A2) were obtained from the field. They were brought to the oven dry condition (OD) and weighed. Data for each of the aggregates is presented in the table below. (Density of water=lg/cm³) Table 1. Absorption capacity and moisture content data. A1 A2 600 g 600 g Field Weight Oven Dry Weight Absorption Capacity (%) | 0.6 % 595.3 g 598.3 g 0.7 % a) Describe the field moisture state of each aggregate, Al and A2 (i.e. wet, SSD, or air dry). For each sample would you add water or dry the sample to bring it to SSD state? Determine the expected mass of each sample in the SSD state. b) If the bulk volume Al oven dry is 220 cm³ and the bulk volume of A2 oven dry is 250 cm³, determine the bulk oven dry specific gravity for each aggregate, Al and A2.
Sample of coarse aggregate from a stockpile are brought to the laboratory for determination of specific gravities and absorption. The following masses were obtained.Mass of moist aggregate = 5,982 gramsMass of oven-dried aggregate = 5,892 gramsMass of aggregates submerged in water = 4,082 gramsMass of SSD aggregate = 5,897 grams a) absorption, in percentb) moisture content of stockpile aggregate, in percentc) free moisture
2) Two aggregates (Al and A2) were obtained from the field. They were brought to the oven dry condition (OD) and weighed. Data for each of the aggregates is presented in the table below. (Density of water=1g/cm') Table 1. Absorption capacity and moisture content data. A1 A2 Field Weight 600 g 600 g 598.3 g Oven Dry Weight Absorption Capacity (%) 0.6 % 595.3 g 0.7% a) Describe the field moisture state of each aggregate, Al and A2 (i.e. wet, SSD, or air dry). For each sample would you add water or dry the sample to bring it to SSD state? Determine the expected mass of each sample in the SSD state. b) If the bulk volume Al oven dry is 220 cm and the bulk volume of A2 oven dry is 250 cm2, determine the bulk oven dry specific gravity for each aggregate, Al and A2. MONSTER E12 PRT SC PAUSE う

Aggregate particles are classified as flaky (Aggregate Shape test) when they have a thickness (smallest dimension) o А. Less than 0.6 of their mean sieve size. В. More than 0.6 of their mean sieve size. C. More than 0.5 of their mean sieve size. D. Less than 0.5 of their mean sieve size. B.