A very long tube (>>1m) is closed at one end and is immersed in a big bath of mercury which entirely fills the tube. The closed end is then carefully lifted until it is vertical and the open end is still just under the surface of the mercury: There is now a gap above the free mercury surface which is a pure vacuum. O There is now a gap above the free mercury surface which is filled with mercury vapour Bubbles of mercury vapour are generated all the way up the mercury column The mercury all spills out of the tube as a risk analysis was not performed The mercury reaches all the way up the tube to the closed end

A very long tube (>>1m) is closed at one end and is immersed in a big bath of mercury which entirely fills the tube. The closed end is then carefully lifted until it is vertical and the open end is still just under the surface of the mercury: There is now a gap above the free mercury surface which is a pure vacuum. O There is now a gap above the free mercury surface which is filled with mercury vapour Bubbles of mercury vapour are generated all the way up the mercury column The mercury all spills out of the tube as a risk analysis was not performed The mercury reaches all the way up the tube to the closed end

Name: A very long tube (>>1m) is closed at one end and is immersed in a big
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A very long tube (>>1m) is closed at one end and is immersed in a bigbath of mercury which entirely fills the tube. The closed end is thencarefully lifted until it is vertical and the open end is still just under thesurface of the mercury:There is n

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

A very long tube (>>1m) is closed at one end and is immersed in a big bath of mercury which entirely fills the tube. The closed end is then carefully lifted until it is vertical and the open end is still just under the surface of the mercury:
b- The right limb of a simple U tube manometer containing mercury is open to the atmosphere while the left limb is connected to a pipe in which a fluid of specific gravity 0.9 is flowing. The center of the pipe is 12 cm below the level of mercury in the right limb. Find the pressure of fluid in the pipe if the difference of mercury level in the two limbs is 20cm. (2.5marks)
The pipe (0-1-2) shown in the …gure is angled upward at 30 and is …lled with water. The distance from (1) to (2) (along the pipe) is 1.2 m. The manometer liquid is mercury. For part (a), the pipe is capped at location (0) so that the water is stationary in the pipe. What would be the value of h in this case? For part (b), the pipe shown is just a section of a much longer pipe, and water is ‡owing upwards from (0) to (1) to (2). If the pressure loss due to friction from location (1) to location(2) is 20 kPa, what is the value of h in this case?
An air bubble is observed from the bottom up to the water surface The atmospheric pressure is 101 325 kPa The volume of the bubble at the bottom is 1/7 times the volume of the bubble at the surface Determine the height of the water in meters.
Consider a differential manometer whose ends are connected to two different pipes A andB and containing different liquids at different levels. Let us assume that the pressure at point A is more than that at point B. Oil is in pipe A whose density 800 kg/m³ shows a difference in mercury levels as 100 mm. The height of oil between center of pipe A to the mercury level in left limb is 200 mm. Methanol (relative density 0.791) is in pipe B and the height of Methanol between center of pipe B and mercury level in the right limb is 5 cm. Calculate the difference in pressures at the two points A and B.
ASAP dont round off initial values, round off final ans only pls ty The pressure at a point in the seawater is 99 kPa, determine the pressure in kPa 48.13 meters below this point?
The system in Fig. is used to calculate the pressure p 1in the tank by measuring the 15-cm height of the liquid in the1-mm-diameter tube. The fl uid is at 60 ° C. Calculate thetrue fluid height in the tube and the percentage error due tocapillarity if the fluid is ( a ) water or ( b ) mercury.
A U-Tube with both ends open to the atmosphere contains mercury in the lower portion. In the left leg, water stands 750 mm above the surface of the mercury; in the other leg, oil with Gs= 0.8 stands 540 mm above the surface of the mercury. Determine the difference in elevation between surfaces of oil and water columns.
A manometer consists of two tubes A and B, with verticalaxes and uniform cross-sectional areas 500 mm2and 800 mm2respectively, connected by a U-tube C of cross-sectional area70 mm2throughout. Tube A contains a liquid of relative density0.8; tube B contains one of relative density 0.9. The surfaceof separation between the two liquids is in the vertical side of Cconnected to tube A. What additional pressure, applied to thetube B, would cause the surface of separation to rise 60 mm inthe tube C?
An oil of specific gravity 0.88 is flowing through the pipe of diameter 30cm. one end of the simple U tube manometer contains mercury, is inserted with the center of pipe and other end is open to atmosphere. The level difference in mercury is found in the right limb as 32 cm. The distance between the center of the pipe and the mercury level in right limb is 18 cm. Find the pressure of oil in the pipe in kPa. Draw the diagram neatly. (Enter only the values by referring the unit given. Also upload the hand written answers in the link provided) The pressure of oil in the pipe (in kPa)
An oil of specific gravity 0.92 is flowing through the pipe of diameter 30cm. one end of the simple U tube manometer which contains mercury, is inserted with the center of pipe and other end is open to atmosphere. The level difference in mercury is found in the right limb as 34 cm. The distance between the center of the pipe and the mercury level in right limb is 10 cm. Find the pressure of oil in the pipe in kPa. (2.5 MARKS) (Enter only the values in the boxes by refering to the unit given in the bracket. Do not send the hand written answer sheets to my mail) The pressure of oil in the pipe Unit in kPa =
A 'U' tube is made of two capillary tubes; one 2 mm in diameter and other 4 mm in diameter. The tube is vertical and partially filled with water of surface tension 0.0736 N/m and zero angle of contact. Calculate the difference of levels in the tubes. Diagrammatic Representation : „ 2mme - Amme Wator