Q4 QUESTION 3Two identical vessels are connected by a tube with a closed valve. Each vessel contains 3 kg of liquid water at 20°C and 100 kPa with specific internalenergy of 80 kJ/kg. They are vented to the atmosphere at 100 kPa. The valve is opened, and the contents are pumped so that they mix freely. Enegytransfer to/from the vessels due to pumping and all other processes is negligible. Which of the following statements is true about the combinedcontents? (There may be multiple correct answers, or none!)O The internal energy of the combined system is 240 kJ.O The temperature of the combined system is 40°C.O The entropy of the combined system is double the initial entropy in one of the vesselsO The specific internal energy of the combined system is 80 kJ/kg.O The temperature of the combined system is 20°C.O The specific volume of the combined system is equal to the initial specific volume of one of the vessels.O The pressure in the combined system is 100 kPa.O The specific volume of the combined system is double the initial specific volume of one of the vessels.QUESTION 4A pressure vessel contains 8 kg of nitrogen with internal energy of 4.6 MJ at a pressure of 3 MPa. What is the specific internal energy of the gas inMJ/kg? (Don't type the units)

Given : mass of nitrogen gas, m =8 kg Internal energy = 4.6 MJ Pressure,…

Answered: A pressure vessel contains 8 kg of…

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q1// Define the following Dryness fraction, Latent heat of evaporation, Super-heated vapour Q2// Determine the enthalpy, the entropy, internal energy and specific volume of steam Vapor at 1100 kPa and x-10% Q3// Determine the enthalpy of steam for: a- Saturated vapor at 200°C b- Superheated at 1 MPa and 400°C c- Saturated liquid at 375 kPa
The air conditions at the intake of an air compressor are 33 C, 50 percent relativehumidity, and 101 kPa. The air is compressed to 400 kPa, then sent to anintercooler. If condensation of water vapor from the compressed air is to beprevented, what is the minimum temperature (tdp) to which the air can be cooled inthe intercooler?Use theoretical calculation for this problem.
Steam at a rate of 200 kg/min enters a turbine at 350°C and 40 bar through a 7.5-cm internal diameter pipe. The turbine operation is adiabatic, and the effluent leaves as saturated water at 5 bar through a 5-cm diameter pipe. 1. Calculate the work produced by the turbine in kW. 2. What is the enthalpyand phase of the effluent stream? 21 If it leaves the turbine at 75C and 5 bar 22 If it leaves the turbine at 30C and 5 bar 7.5
A process to liquify nitrogen gas (N2) from 300K, 200atm to 98.69K (saturation temperature) and 7atm is to be designed. The specific enthalpy of the saturated liquid and saturated vapor at 7atm are, Hl = 74.7 J/g and Hv = 239.2 J/g respectively. Consider combining a heat exchanger with the throttle valve. In particular, the gas cooled by throttling, but not liquefied, is used to cool the inlet gas before it enters the throttle valve. This is achieved in the arrangement with the unliqufied gas leaving the heat exchanger at 290K (stream5.) Stream 4 is still at Tsat and 7atm. Is it possible to achieve liquefaction? If so, what fraction of N2 gas is liquefied in this process? (Hint: try combining mass and energy balances on the overall process)
300 kg/min of water is required to be cooled from 50°C to 25°C in a wet cooling tower. For these purposes, 730 m3/min of atmospheric air is circulated through it at countercurrent. If the atmosphere is at a pressure of 94 kPa and the dry bulb and humid are 25°C and 15°C, respectively, and in the mixing process 3.7% of water is lost per evaporation, determine*:a) Relative and absolute humidity and dew temperature of the atmosphere.b) Absolute humidity and temperature of the air at the outlet.
The air conditions at the intake of an air compressor are 28oC DB, 50% RH, and 101.325 kPa. The air is compressed to 400 kPa, then sent to an intercooler. If condensation of water vapour from the compressed air is to be prevented, what is the minimum temperature to which the air can be cooled in the intercoolers?
A mixture of refrigerant-134a at 120 kPa enters an evaporator with quality 0.12 and leaves it as fully vaporized (quality equal to 1). The latent heat is provided by 16.4 kg/s of air entering in the device at 23 ºC and exiting at 7 °C. Assume constant specific heat of the air cp=1.005 kJ/(kg K). Calculate the mass flow rate of the refrigerant in kg/s to 2 decimal places.
In a dew point apparatus, a beaker is cooled by gradually adding ice water to the water initially at room temperature. The moisture from the room air begins to condense on the beaker when its temperature is (A) 12.5,(B) 13, (C)13.5,(D) 14 and (E) 14.5 C. If the room temperature is 21°C and the barometric pressure is 1.01325 bars, find the partial pressure of water vapour in the room air and parts by mass of water vapour in the room air using a Psychrometric Chart. Write your solution Please solve part D and E only
In a dew point apparatus, a beaker is cooled by gradually adding ice water to the water initially at room temperature. The moisture from the room air begins to condense on the beaker when its temperature is (A) 12.5,(B) 13, (C)13.5,(D) 14 and (E) 14.5 C. If the room temperature is 21°C and the barometric pressure is 1.01325 bars, find the partial pressure of water vapour in the room air and parts by mass of water vapour in the room air using a Psychrometric Chart. Write your solution
Refrigerant 134A has a temperature of 48°C as it enters a valve as a saturated liquid. When leaving it has a pressure of 171 kPa. g. What is the temperature and what is the enthalpy of the gas at the outlet of the valve? h. What is the quality of the gas at the outlet?
A and B containers (fixed volume) are connected together by a valve. Tank A contains 400 kPa and 0.3 m3 refrigerant 134a at 60% dryness. Tank B contains 0.5 m3 of refrigerant 134a at 240 kPa pressure and 100 oC temperature. Then the valve is opened and the system reaches 280 kPa equilibrium pressure. Calculate the final temperature.
What is the enthalpy of refrigerant 134a with s = 0.94190 at 0.85MPa? (Superheated Vapor)

SEE MORE QUESTIONS

Recommended textbooks for you

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Control Systems Engineering

Mechanical Engineering

ISBN:

9781118170519

Author:

Norman S. Nise

Publisher:

WILEY

Mechanics of Materials (MindTap Course List)

Mechanical Engineering

ISBN:

9781337093347

Author:

Barry J. Goodno, James M. Gere

Publisher:

Cengage Learning

Engineering Mechanics: Statics

Mechanical Engineering

ISBN:

9781118807330

Author:

James L. Meriam, L. G. Kraige, J. N. Bolton

Publisher:

WILEY

SEE MORE TEXTBOOKS

A pressure vessel contains 8 kg of nitrogen with internal energy of 4.6 MJ at a pressure of 3 MPa. What is the specific internal energy of the gas in MJ/kg? (Don't type the units)