A piston cylinder contains 1.25 kg water at 25°C with a constant load on the piston such that the pressure is 300 kPa. A nozzle in a line to the cylinder is opened to enable flow to the outside atmosphere at 100 kPa and 25°C. The process continues until 85% of the initial mass has flowed out. At this point, the temperature of water increased by 10°C. Assume that the process is done in an Water isobaric manner. Write the mass and energy balance equations and calculate the work (kJ) and heat (kJ) involved in the process if the exit velocity is 40 m/s. For compressed liquid, assume the substance is a saturated liquid at the given temnerature

A piston cylinder contains 1.25 kg water at 25°C with a constant load on the piston such that the pressure is 300 kPa. A nozzle in a line to the cylinder is opened to enable flow to the outside atmosphere at 100 kPa and 25°C. The process continues until 85% of the initial mass has flowed out. At this point, the temperature of water increased by 10°C. Assume that the process is done in an Water isobaric manner. Write the mass and energy balance equations and calculate the work (kJ) and heat (kJ) involved in the process if the exit velocity is 40 m/s. For compressed liquid, assume the substance is a saturated liquid at the given temnerature

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steel casting weighing 2 kg has an initial temperature of 500oC; 40 kg of water initiallyat 25oC is contained in a perfectly insulated steel tank weighing 5 kg. The casting isimmersed in the water and the system is allowed to come to equilibrium. What is its finaltemperature? Ignore effects of expansion or contraction, and assume constant specific heatsof 4.18 kJ/kg.oC for water and 0.5 kJ/kg.oC for steel.
Need help with this book problem using thermodynamics Nitrogen gas at constant pipeline conditions of 200 kPa and 300 K passes slowly through a valve into a well-insulated, frictionless, and initially evacuated piston-cylinder assembly. A pressure of 150 kPa in the cylinder is needed to support the piston due to its own weight and the ambient atmosphere. The volume under the piston is 1 m3 at the end of the process. Find (a) the boundary work done during this process, (b) the final temperature of the nitrogen in the cylinder, and (c) the mass that enters the cylinder during the process.
A piston cylinder contains 1.25 kg water at 25°C with a constant load on the piston such that the pressure is 300 kPa. A nozzle in a line to the cylinder is opened to enable flow to the outside atmosphere at 100 kPa and 25°C. The process continues until 85% of the initial mass has flowed out. At this point, the temperature of water increased by 10℃. Assume that the process is done in an isobaric manner. Write the mass and energy balance equations and calculate the work (kJ) and heat (kJ) involved in the process if the exit velocity is 40 m/s. For compressed liquid, assume the substance is a saturated liquid at the giventemperature.
A large mining company was provided with a 3 m3 of compressed air tank. Air pressure in the tank drops from 700 kpa to 180 kpa while the temperature remains constant at 28°C. What percentage has the mass of air in the tank been reduced?
If air is heated at constant pressure from 1.7 m3, 27 °C and 97 kPa to 417 °C. It is then cooled at constant volume back to its initial temperature Which is figure depicts the processes? Conipr- A Vg=Uz B. N2
Q3/A piston-cylinder contains air at 150Kpa and 400 C after cool air to temperature of 20 C. Determine the final pressure and work done during this process if the piston resting on the stops? (The position of the stops corresponding to 0.5 of the initial volume)
Inside a piston cylinder. 10g of air is adiabatically compressed. Initially the air is at 27 degree celsius and 110kpa. After compression, the air is 450 degree Celsius. What is the final pressure, heat transferred, internal energy increase and work required?
Steam at a pressure of 11 bar and a temperature of 320C is containedin a large vessel. Connected to the vessel through a valve is a turbinefollowed by a small initially evacuated tank with a volume of 0.60 m3.When emergency power is required, the valve is opened and the tankfills with steam until the pressure is 11 bar. The temperature in the tankis then 400C. The filling process takes place adiabatically and kineticand potential energy effects are negligible. Determine the amount ofwork developed by the turbine in kJ.
200 gram of steam at 200kPa are compressed undergoing isothermal quasi-static process at 200oC until the steam volume reaches 10% of its original one. What is the work and heat done during the process?
Saturated steam has a pressure 2.356 Mpa. What are the temperature, specific internal energy, specific volume, and specific entropy? Is the conditionof the steam is wet, dry or superheated? Why?
Ammonia with MW=17, weighing 22kg is confirmed inside a cylinder equipped with a piston has initial pressure of 413kPa and 48C. if 2900kJ of heat is added until the final pressure is 413kPa and final temperature is 100C. Determine Work non flow of the system. k
5- During some actual expansion and compression processes in piston cylinder device, the gases have been observed to satisfy the relationship Py" = const.. Calculate: (1) the work done when a gas expands from a state 150 kPa and 0.03 m' to a final volume of 0.2 m for (n=1.3), and (2) show the process on P-V diagram