A manufacturer has a contract to produce 5,000 units of a certain device. The device can be made by highly-trained workmen working individually. The device can also be made by less-skilled workmen working together if they are given a specialized equipment and proper supervision. The highly-trained workmen are paid P20.00 per hour, and each can produce one unit every 2 hours, on the average. The specialized equipment can be placed in operation at an original cost of P60,000 and it will be worthless at the time all the 5,000 units are manufactured. With this equipment four men, paid P15.00 each per hour, and a foreman, paid P25.00 per hour, can do the work. All the five men working together can finish one unit in 15 minutes. Determine the gain or loss if the specialized equipment is used.

A manufacturer has a contract to produce 5,000 units of a certain device. The device can be made by highly-trained workmen working individually. The device can also be made by less-skilled workmen working together if they are given a specialized equipment and proper supervision. The highly-trained workmen are paid P20.00 per hour, and each can produce one unit every 2 hours, on the average. The specialized equipment can be placed in operation at an original cost of P60,000 and it will be worthless at the time all the 5,000 units are manufactured. With this equipment four men, paid P15.00 each per hour, and a foreman, paid P25.00 per hour, can do the work. All the five men working together can finish one unit in 15 minutes. Determine the gain or loss if the specialized equipment is used.

Fundamentals Of Construction Estimating

4th Edition

ISBN:9781337399395

Author:Pratt, David J.

Publisher:Pratt, David J.

Chapter12: Pricing Masonry, Carpentry, And Finishes Work

Section: Chapter Questions

Problem 7RQ

See similar textbooks

Similar questions

3. An aircraft manufacturer uses 1,000,000 special rivets per year at a uniform rate. The rivets are made on a single-spindle automatic screw machine at the rate of 3,000 per hour. The manufacturing cost is $0.0052 per rivet and the storage cost is estimated to be $0.0008 per rivet per year. The set-up cost is $40 per set-up. Calculate the economic production quantity and the allow- able variation in this quantity for a maximum deviation from the minimum cost of 5%. Assume the machine operates 1,700 hours per year,
Machine A has a price of $60,000, annual operating cost of $24,000, and life of 5 years. Machine B has a price of $120,000, annual operating cost of $12,000, and life of 10 years. At MARR=10% per year, use EAC and PW to choose the better machine. (a) Using EAC, which machine would you choose? (b) Using PW, which machine would you choose?
A foundry has a fixed daily cost of Rs. 50,000 whenever it operates and a variable cost of Rs. 800 Q, where Q is the daily production in tones. What is the cost o production in Rs per tone for a daily production of 100 tonnes? A. Rs, 1300 B. Rs, 1500 C. Rs, 1600 D. None
Question 4. Carbondale Casting produces cast bronze valves on a 10-person assembly line. On a recent day, 160 valves were produced during an 8-hour shift. a) Calculate the labour productivity of the line. b) John Goodale, the manager at Carbondale, changed the layout and was able to increase production to 180 units per 8-hour shift. What is the new labour productivity per labour-hour? c) What is the percentage of productivity increase?
2. Machine A has a price of $60,000, annual operating cost of $24,000, and life of 5 years. Machine B has a price of $120,000, annual operating cost of $12,000, and life of 10 years. At MARR=10% per year, use EAC and PW to choose the better machine. (a) Using EAC, which machine would you choose?
3. An electric switch manufacturing company has to choose one of three different assembly methods. Method A will have a first cost of $40,000, an annual operating cost of $9000, and a service life of 2 years. Method B will cost $80,000 to buy and will have an annual operating cost of $6000 over its 4-year service life. Method C will cost $130,000 initially with an annual operating cost of $4000 over its 8-year life. Methods A and B will have no salvage value, but method C will have some equipment worth an estimated $12,000. Which method should be selected? Use present worth analysis at an interest rate of 10% per year.
The Union Manufacturing Company is producing two types of products: A and B. The demand forecasts, batch size, and time standards follow in table 2: Table No 2 Product A Product B Demand forecast (units/yr) 1,000 4,000 Batch size (units/batch) 20 10 Processing time (hr/unit) 3.2 4.5 Setup time (hr/batch) 10 20 Both products are produced on the same machine, called Mark I. i) What is the total number of hours required of Mark I equipment for the next year? ii) The company works 250 days per year and operates two shifts, each covering 8 hours. If a 15 percent capacity cushion is maintained, how many hours of capacity can the company expect from each of its Mark I machines?
A company produces two very similar products that go through a three-step sequence of fabrication,assembly, and packaging. Each step requires one day for a lot to be completely processed and movedto the next department. Processing requirements for the departments (hours per unit) are as follows.FABRICATION ASSEMBLY PACKAGINGProduct Labor Machine Labor Machine Labor MachineA 2 1 1.5 1 1 .5B 1 1 1 1 1.5 .5Department capacities are all 700 hours of labor and 500 hours of machine time, except Friday,when capacities are 200 hours for both labor and machine time. The following production scheduleis for next week.Product Mon Tues Wed Thurs FriA 200 400 100 300 100B 300 200 200 200 200a. Determine the labor and machine capacity requirements for each product and the total load foreach department for each day. Ignore changeover time.b. Evaluate the projected loading for the first three days of the week. Is the schedule feasible?What do you suggest for balancing the load?
A factory engaged in the fabrication of an automobile part with a production capacity of 700,000 units per year is only operating at 62% of capacity due to unavailability of the necessary foreign currency to fiancé the importation of their raw materials. The annual income is P430,000, annual fixed costs are P190,000 and variable costs are PO.348 per unit. What is the current profit or loss?
This is I'm uploading second time. If you don't know the solution please leave it but don't copy from other experts solution. Give me right solution with clear calculations.
A light manufacturing firm has set up a project for develop- ing a new machine for one of its production lines. The most likely estimated cost of the project itself is $1,000,000, but the most optimistic estimate is $900,000 while the pessimists predict a project cost of $1,200,000. The real problem is that even if the project costs are within those limits, if the project itself plus its implementation costs exceed $1,425,000, the project will not meet the firm’s NPV hurdle. There are four cost categories involved in adding the prospective new machine to the production line: (1) engineering labor cost, (2) nonengineering labor cost, (3) assorted material cost, and (4) production line downtime cost. The engineering labor requirement has been estimated to be 600 hours, plus or minus 15 percent at a cost of $80 per hour. The nonengineering labor requirement is esti- mated to be 1,500 hours, but could be as low as 1,200 hours or as high as 2,200 hours at a cost of $35 per hour. Assorted…
In building their plant, the officers of the International Leather Company had the choice between alternatives: One alternative is to build in Metro Manila where the plant would cost P2,000,000. Labor would cost annually P120,000 and annual overhead P40,000. Taxes and insurance would total 5% of the first cost of the plant. The second alternative would be to build in Bulacan a plant costing P2,250,000. Labor would cost annually P100,000 and overhead would be P55,000. Taxes and insurance would total 3% of the first cost. The cost of raw materials would be the same in either plant. If capital must be recovered within 10 years and money is worth at least 20%, which site should the officers of the company choose?