A homeowner is trying to decide between a highefficiency natural gas furnace with an efficiency of 97 percent and a ground-source heat pump with a COP of 3.5. The unit costs of electricity and natural gas are $0.115/kWh and $0.75/therm (1 therm = 105,500 kJ). Determine which system will have a lower energy cost.

A homeowner is trying to decide between a highefficiency natural gas furnace with an efficiency of 97 percent and a ground-source heat pump with a COP of 3.5. The unit costs of electricity and natural gas are $0.115/kWh and $0.75/therm (1 therm = 105,500 kJ). Determine which system will have a lower energy cost.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter2: Matter And Energy

Section: Chapter Questions

Problem 27RQ: How many Btu/h would be produced in a 12-kW electricheater?

See similar textbooks

Similar questions

By supplying energy to a house at a rate of 25,000 kJ/hr, a heat pump maintains the temperature of the dwelling at 20 C when the outside air is at -10 C. If electricity costs 8 cents per kW-hr, determine the minimum theoretical operating cost to heat the house for 24 hours. $1.97 O $1.37 $1.75 O $1.51 O$1.64
If a house needs a minimum heat transfer rate of 75 kJ/h (i.e., 75 kJ of heat needs to be transferred into the house during one hour) to maintain a pleasant indoor temperature. If one wants to use a heat pump with a COP of 5.55 to fulfill this heat transfer rate, what is the corresponding electricity (in kWh) consumption to run such a heat pump for one hour?
1. A geothermal heat pump with a COP of 1.3 provides 48000 BTU/hr of heat to a building. Assuming an electrical power rate of $0.20/kWh. answer the following questions for this system: a. What would be the monthly cost to provide heat at a rate of 48000 BTU/hr if the heat was delivered by a simple electrical resistance heater? b. How much heat is drawn from the ground by the heat pump in that month, in kWh? c. What is the savings per month enjoyed by operating this heat pump for a month vs. a simple electrical resistance heater?
An inventor claims to have a solar powered heat pump that receives energy as heat from the sun at the rate of 10 kW and extracts energy as heat from the environment at the rate of 7 kW. This system does not require any shaft or electrical power input. If you think this device is impossible, explain why using basic principles to support your argument. If you think it might be possible, what would be the steady-state rate of transfer of energy as heat to the house? (Assume TH = 20 Cand TL = -15 C).
An electric home stove with 3 burners and microwave is used in preparing a meal asfollows. Burner 1: 20 minutes Burner 2: 40 minutes Burner 3: 15 minutes . Microwave: 30minutes. If each burner is rated at 1.2 kW and the oven at 1.8 kW, and electricity costs 1000(IQ =Iraqi Dinar) per k Wh, calculate the cost of electricity used in preparing the meal?
A heat pump is used to extract heat from the outside atmosphere to heat the inside of a building. On a day when the outside air temperature is Tc°C, the heat pump is operating to a COP of 3.7, maintaining the inside temperature of the building at Th°C. If the building is losing heat at the rate of 53,709 kJ/hour in these conditions, determine how much power (kW) must be supplied to a heat pump? Keep two decimal places
A house that was heated by electric resistance heaters consumed 1200 kWh of electric energy in a winter month. If this house were heated instead by a heat pump that has an average COP of 2.4, determine how much money the homeowner would have saved that month. Assume a price of $0.12/kWh for electricity.
Consider a building whose annual air-conditioning load is estimated to be 150,000 kWh in an area where the unit cost of electricity is $0.12/kWh. Two air conditioners are considered for the building. Air conditioner A has a seasonal average COP of 3.3 and costs $5500 to purchase and install. Air conditioner B has a seasonal average COP of 4.45 and costs $6500 to purchase and install. All else being equal, determine which air conditioner is a better buy.
A device collects energy from the sun's rays and produces a high temperature of 95 °C. A small heat engine then uses this as a high temperature reservoir and operates at an ambient temperature of 15 °C. What is the maximum possible thermal efficiency of this heat engine? After some improvements are made to the solar energy collector, the high temperature it produces is now Tnew. If it is given that the new maximum possible thermal efficiency of the heat engine is double the previous one, what is Tnew? (Assume that the ambient temperature stays the same)
A heat pump with a COP of 3.2 is used to heat a perfectly sealed house (no air leaks). The entire mass within the house (air, furniture, etc.) is equivalent to 1200 kg of air. When running, the heat pump consumes electric power at a rate of 5 kW. The temperature of the house was 7°C when the heat pump was turned on. If heat transfer through the envelope of the house (walls, roof, etc.) is negligible, the length of time the heat pump must run to raise the temperature of the entire contents of the house to 22°C is (a) 13.5 min (b) 43.1 min (c) 138 min (d) 18.8 min (e) 808 min
Replacing incandescent lights with energy-efficient fluorescent lights can reduce the lighting energy consumption to one-fourth of what it was before. The energy consumed by the lamps is eventually converted to heat, and thus switching to energy-efficient lighting also reduces the cooling load in summer but increases the heating load in winter. Consider a building that is heated by a natural gas furnace with an efficiency of 80 percent and cooled by an air conditioner with a COP of 3.5. If electricity costs $0.12/kWh and natural gas costs $1.40/therm (1 therm = 105,500 kJ), determine if efficient lighting will increase or decrease the total energy cost of the building in summer.
A 650 MW steam power plant has an efficiency of 62%.it is cooled by rejecting heat to a nearby river. The rate of heat transfer to the river is MW. 642.5 1274.5 398.39