A four-lane freeway has the following characteristics: 10-ft lanes, 2-ft lateral clearance, interchange density is 1.5 interchanges per mile. The roadway length is 0.75 miles and upgrade at 3%. The roadway has a peak hour demand of 3200 vph. The peak hour factor is 0.95. There are 15 % trucks and 5% recreational vehicles. The driver adjustment factor is 1.0. Base freeflow speed is 65 mph. Find the Level of Service for this freeway.

A four-lane freeway has the following characteristics: 10-ft lanes, 2-ft lateral clearance, interchange density is 1.5 interchanges per mile. The roadway length is 0.75 miles and upgrade at 3%. The roadway has a peak hour demand of 3200 vph. The peak hour factor is 0.95. There are 15 % trucks and 5% recreational vehicles. The driver adjustment factor is 1.0. Base freeflow speed is 65 mph. Find the Level of Service for this freeway.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4- ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak-hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak 15-minute volume is 1421 vehicles. What are the freeway’s density and level of service
A four-lane freeway with the following characteristics: ten foot travel lanes lateral obstructions at 0 feet at the roadside total ramp density is 4.5 ramps/mile rolling terrain The roadway has a current peak demand volume of 3500 veh/h. The peak hour factor is 0.95 and there are no trucks, buses, or RVs in the traffic stream because the roadway is classified as a parkway and such vehicles are prohibited. At what level of service will the freeway operate during its peak period of demand?
An existing urban freeway with 4 lanes in each direction has the following characteristics. Traffic data: Peak hour volume (in the peak direction): 7,110 veh/h Trucks: 10% of peak hour volume PHF = 0.93 Geometric data: Lane width: 11 ft Shoulder width: 6 ft Total ramp density: 1.8 ramps per mile Terrain: rolling Determine the LOS in the peak hour. (Assume commuter traffic and assume no RVs.) LOS A LOS B LOS C LOS D LOS E LOS F Show the demand flow rate (in pc/h/ln), mean speed (in mi/h), and density (in pc/mi/ln) for the given conditions. demand flow rate pc/h/lnmean speed mi/h density pc/mi/ln
A two-lane rural highway carries a peak hour volume of 465 (vph) and has the following characteristics: Roadway: 60mph design; 11 foot lanes, 2 foot shoulders; rolling terrain; 60% no-passing zones; length = 3 miles. Traffic: 70/30 directional split; 4% trucks; 2 percent recreational vehicles; 1 percent buses; PHF = 0.95 a) What Level of Service will the highway operate under during peak periods? b) What is the capacity of the highway? Explain why this is less than 2,800 (vph)?
6.9 An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4-ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak- hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak-hour factor is 0.95. It has been decided that heavy vehicles will be banned from the freeway during the peak hour. What will the freeway's density and LOS be before and after the ban? (Assume that the heavy vehicles are removed and all other traffic attributes are unchanged.)
A six-lane freeway (three lanes in each direction) in mountainous terrain has 10-ft lanes and obstructions 1 ft from the right edge. There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. The traffic stream consists of mostly commuters with a peak hour factor of 0.84, peak-hour volume of 2500 vehicles, and 4% recreational vehicles. What is the level of service? (Write the letter only)
A six-lane freeway (three lanes in each direction) in mountainous terrain has 10-ft lanes and obstructions 5 ft from the right edge. There are zero ramps within three miles upstream of the segment midpoint and one ramp within three miles downstream of the segment midpoint. The traffic stream consists of mostly commuters with a peak hour factor of 0.84, peak-hour volume of 2500 vehicles, and 4% recreational vehicles. What is the level of service?
An urban freeway is to be designed using the following information. AADT = 52,500 veh/day K (proportion of AADT occurring during the peak hour): D (proportion of peak hour traffic traveling in the peak direction): Trucks: PHF = 0.94 Lane width: Shoulder width: Total ramp density: Terrain: 3 Determine the number of lanes in the peak direction required to provide LOS C. (Assume commuter traffic and assume no RVs.) lanes. 0.12 0.65 8% of peak hour volume demand flow rate 12 ft 10 ft 0.5 interchange/mile; all interchanges are to be cloverleaf interchanges rolling HV' Show all calculations required. (Calculate your answers for the peak direction only. Enter fy, the peak hour volume in veh/h, the free flow speed in mi/h, the demand flow rate in pc/h/In, the mean speed in mi/h, and the density in pc/mi/ln.) fHV peak hour volume 0.893 free flow speed mean speed density 6300 X Your response differs from the correct answer by more than 10%. Double check your calculations. veh/h 1500 X Your…
C] An urban freeway in an area with rolling terrain has 8 lanes (4 in one direction). It has 12-ft lanes and 4 ft shoulder clearance. The peak hour volume in peak direction is 6000 vph, with 8% trucks, and a peak hour factor of 0.90. On average there is one diamond interchange every 2 miles. Determine the following for the peak direction under study: (a). Passenger-car equivalent flow rate (pcphpl); (b). Estimated free-flow speed for prevailing conditions; (c). Average passenger car speed; (d). LOS.
A six-lane freeway (three lanes in each direction in mountainous terrain has 10-ft lanes and obstructions 1ft from the right edge. There are five ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. The traffic stream consists of mostly commuter with a peak hour factor of 0.84, peak-hour volume of 2500 vehicles, and 4% recreational vehicles. What is the level of service?
An existing urban freeway with 4 lanes in each direction has the following characteristics. Traffic data: Peak hour volume (in the peak direction): Trucks: PHF = 0.93 Geometric data: LOS A LOS B LOS C LOS D LOS E LOS F Lane width: Shoulder width: Total ramp density: Terrain: rolling 11 ft 6 ft 1.8 ramps per mile Determine the LOS in the peak hour. (Assume commuter traffic and assume no RVs.) mean speed density 7,010 veh/h 10% of peak hour volume Show the demand flow rate (in pc/h/In), mean speed (in mi/h), and density (in pc/mi/In) for the given conditions. demand flow rate 2199 pc/h/In 54 X mi/h 41 X pc/mi/In
An existing six-lane divided multilane highway with a field-measure free-flow speed of 45mph serves a peak-hour volume of 4,000 vehicles per hour, with 10% trucks (50% SUT, 50% TT). The PHF is 0.88. The highway has generally rolling terrain. What is the likely level of service for this segment? Good weather, no incidents, no work zones, and regular drivers may be assumed.