A beer cylindrical barrel has a mass of 12 kg with an inside length twice its diameter of 46 cm. Assuming the density of beer is 950 kg/m³, determine the total mass and weight of the barrel when it is filled with beer.

A beer cylindrical barrel has a mass of 12 kg with an inside length twice its diameter of 46 cm. Assuming the density of beer is 950 kg/m³, determine the total mass and weight of the barrel when it is filled with beer.

Name: A beer cylindrical barrel has a mass of 12 kg with an inside length t
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A beer cylindrical barrel has a mass of 12 kg with an inside length twice its diameter of 46cm. Assuming the density of beer is 950 kg/m³, determine the total mass and weight of thebarrel when it is filled with beer.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

A spherical shaped container is completely filled with engine oil (density = 878 kg/m³) with a mass of 832 g. Determine the radius of the sphere.
In his experiment to test whether the crown of the king of Syracuse was made of pure gold or not. Archimedes immersed the crown into a container filled with water. He noted that the crown displaced 150ml of water. If the mass of the crown is 2675g, is it made of pure gold?
Take the density of the crown to be ρc. What is the ratio of the crown's apparent weight (in water) Wapparent apparent to its actual weight Wactual? Express your answer in terms of the density of the crown ρc and the density of water ρw.
The volume of the fluid inside the upright conical tank is 0.8 ft3. (a) Determine the needed volume to fill up the entire container. (b) Determine the height of the air from the peak and base of the tank. (c) If the mass of the fluid is 40 kg, determine its density.
A roller with a diameter of D=84 cm, unit width up to a quarter of the volume was filled with methanol and immersed in water. Determine the mass of the roller if the height of the roller above the water is h=21 cm.
A container filled with oil has a weight of 2 kilonewtons and an empty weight of 200 newtons. If the capacity of the container is 190 liters, caleulate the specific weight, mass density and the specific volume of the oil?
A rectangular parallelepiped tank measuring 40cm x 30cm x 20cm is filled with water. Determine the force acting on each face of the tank if (a) it is open at the top and (b) closed at the top.
A 1-m diameter and 1.6-m height cylindrical drum is filled with a fluid whose density is 850 kgm/m3. Determine the following: Specific weight in lbf/ft3.
Consider a stack of six pancakes. Each pancake is made of 1/4 cup (approximately 60 mL) of batter, and the density of batter is 1 g/cm3. Consider the pancake at the bottom of the stack. What is the total weight of pancakes sitting on top of it? Express your answer in kilograms, but without entering the unit. This is not a lot of weight. Assuming that pancakes have an elastic modulus of 20 kPa, that the area of each pancake is identical (approximately 80 ), and that the stack of pancakes has a height of 55mm, compute how much the single pancake at the bottom of the stack is compressed by the weight of the pancakes on top of it. This is a very small compression, so instead you place a 4 kg weight on the pancakes. Now you see that the stack noticeably compresses. Consider the stack of pancakes as one aggregate unit with a surface area of approximately 80 cm2. What is the stress on the pancakes? Express your answer in Pascals, but without including the unit. Your observation of the normal…
A glass in a form of a right circular cylinder is filled with water to the brim. It has a base radius of 10 cm and a height of 25 cm. If half of its contents is transferred to another cylindrical container with a base radius of 15 cm, calculate the height of the water in that new container.
A 1-kg cube of wood floats in an upright position in fresh water. If a side of the cube measures 12.5 cm, determine the pressure acting at the bottom of the cube due to the water. How deep is the cube floating?
The volume and average density of an irregularly shaped object are to be measured using a spring balance. An object weighing 8200 N in air weighs 4740 N in water. Determine the volume and average density of the object. (The object is completely submerged in water.)