A 75 mm-Ø orifice is on the vertical side of a closeà tank. The tank rests on a flat ground and the orifice is 0.5 m above the ground. Filled with four fluids with air on the topmost portion that is under a pressure of 15 KPa, and the rest of specific gravities of 0.80, 1.0, and 1.50, respectively, the jet hits the ground at a horizontal distance of 3.75 m. If the liquids have the same thickness, and the power lost in the system is 233 watts, determine the following: (a) The initial discharge in L/s if C=0.63. (b) The thickness of each liquid in m. (c) The coefficient of contraction.

A 75 mm-Ø orifice is on the vertical side of a closeà tank. The tank rests on a flat ground and the orifice is 0.5 m above the ground. Filled with four fluids with air on the topmost portion that is under a pressure of 15 KPa, and the rest of specific gravities of 0.80, 1.0, and 1.50, respectively, the jet hits the ground at a horizontal distance of 3.75 m. If the liquids have the same thickness, and the power lost in the system is 233 watts, determine the following: (a) The initial discharge in L/s if C=0.63. (b) The thickness of each liquid in m. (c) The coefficient of contraction.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A pipe carrying oil of sp gr 0 877 changes in A pipe carrying oil of sp gr 0.877 changes in size from 150mm at section E to 450mm at section R Section E is 3 66m lower than R section R. Section E is 3.66m lower than R and the pressures are 91.0kPa and 60.3kPa, respectively. If the discharge is 0.146m3 respectively. If the discharge is 0.146m /s, determine the lost head and the direction of flow.
A 75 mm-Ø orifice is on the vertical side of a closed tank. The tank rests on a flat ground and the orifice is 0.5 m above the ground. Filled with four fluids with air on the topmost portion that is under a pressure of 15 KPa, and the rest of specific gravities of 0.80, 1.0, and 1.50, respectively, the jet hits the ground at a horizontal distance of 3.75 m. If the liquids have the same thickness, and the power lost in the system is 233 watts, determine the following: (a) The initial discharge in L/s if C=0.63. (b) The thickness of each liquid in m. (c) The coefficient of contraction.
A venturi meter with a throat diameter of 100 mm is fitted in the inclined pipeline of 200 mm diameter with oil of specific gravity 0.88 flowing upwards. The venturi meter coefficient is 0.96. Two pressure gauges are fitted at tapping points, one at the throat reads the vacuum pressure of 40 cm of mercury and the other in the inlet pipe 320 mm below the throat is 20.231 N/cm2. If the loss of head in the main and throat is 0.35 times the kinetic head of the pipe, determine2.1 the volume flow rate of oil through the pipe2.2 the difference in level in the two limbs of the mercury manometer if it is connected to the tapping points and connecting pipes are filled with the same oil
The throat area of a c-d nozzle is 10 cm^2 and its exit is 20 cm^2. If the stagnation pressure is 1 bar, what is the exit pressure (Pe) range needed to ?chock the throat greater or equal 0.935 bar O less or equal 0.937 bar O greater or equal 0.0935 bar and less or equal 0.937 bar greater or equal 0.937 bar and less or equal 1 bar O
8-43 Oil with p = 876 kg/m³ and μ = 0.24 kg/m s is flow- u . ing through a 1.5-cm-diameter pipe that discharges into the
Tanks A and B containing oil and glycerin of sp.gr. 0.78 and 1.25 respectively are connected by a differential gage. The mercury (sp.gr. = 13.6) in the gage is at elev. 1.60m on the A side and at 1.10m on the B side. If the elevation surface of glycerin int the tank B is 21.10m, at what elevation is the surface of oil in tank A? Elev = ? oil -ELev 21.10m S= 0.78 G Lycerin S= 1.25 -ELer l.60m Elev 1.10m Hg (13.6)
A pressure gage at elevation of 12m at the side of the tank containing liquid reads 100 kPa. Another gage at elevation 7 m reads 140 kPa. Compute the density of the liquid. L00 kPa - El. 12 Sm 140 kPa - El. 7
1) Determine the flow in Ips on the orifice between the 2 tanks shown below AIR 25kPa AIR 10kPa OIL S=0.80 OIL S=0.80 WATER WATER ORIFICE C0 60 D-50mmo 2,8m 2m 1.5m WL
4) A 150m long, 15cm diameter cast iron pipe discharging at elevation 6m higher than the oil surface in the tank. If the oil has kinematic viscosity of 2.1(10) m/s and specific gravity of 0.84, what is the pressure on the oil surface in order to cause a flow rate of 131ps in the pipe? Use relative roughness &=0.26mm. EL - 16m AIR EL = 10m L=150m OIL
A plate 0.05mm distant from a fixed plate moves at 1.2m/sec and requires a fore of 2.2 N/m² to maintain this speed. Find the viscosity of the fluid between theplates. 1& Dr. Ahmed Raho
A cylinder glass tubing 2.8 cm. inside diameter and 90 cm long with one end closed is immersed vertically with the open end down into a tank of cleaning solvent (sp.gr. - 0.73) until only 5 cm. of its length remain above the liquid surface. If the barometric pressure is 1 kg/cm and neglecting vapor pressure, compute the height of air inside the glass. -2.8cm- Scm 90cm Cleaning solvent *(S=0.73) Do not write the unit. You will only input the numerical answer in the space provided. Unit of the Correct Answer: cm Decimal Places required in the final answer: 2
Water fills the pipe AB such that the absolute pressure at A in 400 kPa The inner diameter of the pipe is 45 mm The density of the water is 1000 kg/m¹ Acceleration due to gravity is 9 81 m/s² (Eigure 1) Figure 0.3 m B 0.4 m 1 of 1 Part A If the atmospheric pressure is 101 kPa. determine the resultant force the water and surrounding air exert on the cap at B Express your answer to three significant figures and include the appropriate units. View Available Hint(s) HA F-0.5810³ Submit 4 Previous Answers N ? X Incorrect; Try Again: 3 attempts remaining CotINI