4. Many private water wells produce only 1 or 2 gallons of water per minute. One way to avoid running out of water with these low- yield wells is to use a holding tank. A family of 4 will use about 250 gallons of water per day. However, there is a "natural" water holding tank in the casing (i.e. the hole) of the well itself. The deeper the well, the more water that will be stored that can be pumped out for household use. But how much water will be available? Write a method that allows the user to input the radius of the well casing in inches (a typical well will have a 3 inch radius) and the depth of the well in feet (assume water will fill this entire depth, although in practice that will not be true since the static water level will generally be 50 feet or more below the ground surface). The program should output the number of gallons stored in the well casing. For your reference: The volume of a cylinder is where r is the radius and h is the height. 1 cubic foot = 7.48 gallons of water. For example, a 300 foot well full of water with a radius of 3 inches for the casing holds about 441 gallons of water -- plenty for a family of 4 and no need to install a separate holding tank.

4. Many private water wells produce only 1 or 2 gallons of water per minute. One way to avoid running out of water with these low- yield wells is to use a holding tank. A family of 4 will use about 250 gallons of water per day. However, there is a "natural" water holding tank in the casing (i.e. the hole) of the well itself. The deeper the well, the more water that will be stored that can be pumped out for household use. But how much water will be available? Write a method that allows the user to input the radius of the well casing in inches (a typical well will have a 3 inch radius) and the depth of the well in feet (assume water will fill this entire depth, although in practice that will not be true since the static water level will generally be 50 feet or more below the ground surface). The program should output the number of gallons stored in the well casing. For your reference: The volume of a cylinder is where r is the radius and h is the height. 1 cubic foot = 7.48 gallons of water. For example, a 300 foot well full of water with a radius of 3 inches for the casing holds about 441 gallons of water -- plenty for a family of 4 and no need to install a separate holding tank.

C++ for Engineers and Scientists

4th Edition

ISBN:9781133187844

Author:Bronson, Gary J.

Publisher:Bronson, Gary J.

Chapter5: Repetition Statements

Section: Chapter Questions

Problem 2PP: (Mechanics) The deflection at any point along the centerline of a cantilevered beam, such as the one...

See similar textbooks

Similar questions

One out of a thousand soda cups you have is poisonous. You have ten test samples that you can use to look for poison. A single drop of poison will forever mark the test strip as positive.A test strip may have any number of droplets applied at once, and it may be used again and again (as long as the results are negative). Tests can only be performed once per day, and results don't come back for seven days. How could you identify the poisoned container in the shortest amount of time?A follow-up Create software to practise your strategy.
A factory produces two types of wood blocks with 2m and 4m lengths. The blocks are moved by a conveyor belt and passing under two photocells A and B spaced by 3m apart as shown in the following figure. The blocks are separated by more than 4m. A trap door is placed immediately to the right of photocell B. To separate the two types of blocks, it is required that the trap door should open when the small block pass under Band close when the blocks passed beyond B. The door opens when the output (2) of state machine is logic 1. The designer needs for . AND-gate(s) for implementing the aforementioned state machine (2) a d> 4m 3m 0.25m
Pedestrian Crossing Traffic Lights Design a finite state machine based system that emulates the operation of a set of pedestrian crossing lights. There should be two sets of lights, one set for traffic and one set for pedestrians. The light for traffic should normally be green. When a pedestrian pushes the crossing button, the lights should change to allow them to cross the road. Pedestrians should not be able to permanently stop traffic by repeated pushing of the button (i.e. there should be a suitable delay somewhere in the system so that traffic has a chance to move even if there is a non-stop supply of pedestrians wishing to cross). The traffic lights for traffic should follow the standard UK sequence of green, amber, red, red/amber. The lights for pedestrians should only be red and green (i.e. ‘cross’ and ‘don’t cross’). Use the DE1 buttons, LEDs and seven segment displays in any appropriate way to demonstrate the system in operation NOTE: 1.Write its Verilog code. Write test…
When purifying drinking water you can use a so-called membrane filtration. In an experiment one wishes to examine the relationship between the drop across a membrane and the flux (flow per area) through the membrane. We observe the following 10 related values of pressure (x) and flux (y): pressure 2 3 4 5 6 7 8 9. 10 Pressure (x) 1.02 2.08 2.89 4.01 5.32 5.83 7.26 7.96 9.11 9.99 Flux (y) 1.15 0.85 1.56 1.72 4.32 5.07 5.00 5.31 6.17 7.04 Copy this into R to avoid typing in the data: D <- data.frame( pressure=c(1.02,2.08,2.89,4.01,5.32,5.83,7.26,7.96,9.11,9.99), flux=c(1.15,0.85,1.56,1.72,4.32,5.07,5.00,5.31,6.17,7.04)
The process shown in figure 1 involves pumping fluid from Tank A to Tank B. The operation of the process can be described as follows, Before starting, PS1 must be closed. When the start button is pushed, the pump starts. The button can then be released and the pump continues to operate. When the stop button is pushed, the pump stops. PS2 and PS3 must be closed 8s after the pump starts. If either PS2 or PS3 opens, the pump will shutoff and will not be able to start again for another 15 s. For the above mentioned conditions develop a ladder program using direct method and provide the allocation list. PS1 PS2 PS3 Tank Tank Pump Figure 1 B.
One out of a thousand Coke bottles you have is poisonous. You have ten test strips that you may use to look for poison. A single drop of poison will permanently mark the test strip as positive.A test strip may have any number of droplets applied at once, and it may be reused as often as desired (as long as the results are negative). Tests can only be conducted once each day, and results don't come back for seven days. How could you identify the poisoned bottle in the shortest amount of time?A follow-up Create software to simulate your strategy.
Computer Science Investing in stocks is a way to create assets that are supposed to provide financial security over time. In solving this problem, we assume that an investor buys several shares of stock at a certain price. These shares are going to be sold later on for a different price. Obviously, if the selling price is higher than the acquisition price, the investor makes a profit, registering capital gain. If the shares are sold at a lower price, the investor has a loss, which marks a negative capital gain. This whole process is done over a period of time, and you are required to create a scenario for buying and selling shares. The assumption is that the investor sells shares in the order in which they were purchased. The goal is to calculate the capital gain over time. Suppose that you buy n shares of stock or mutual fund for d dollars each. Later, you sell some of these shares. If the sale price exceeds the purchase price, you have made a profit—a capital gain. On the other…
A project currently underway at Chemical Labs, Inc requires that a substance be continued ally heated in a vat. A technician must check the substance’s temperature every 15 minutes. If the substance’s temperature does not exceed 102.5 degree Celsius, then the technician does nothing. However, if the temperature is greater than 102.5 degrees Celsius, the technician must turn down the vat’s thermostat, wait 5 minutes, and check the temperature again. The technician repeats these step until the temperature does not exceed 102.5 degree Celsius. The director of engineering department has asked you as a programmer to writes a program that guides the technician through this process.
A project currently underway at Chemical Labs, Inc requires that a substance be continued ally heated in a vat. A technician must check the substance's temperature every 15 minutes. If the substance's temperature does not exceed 102.5 degree Celsius, then the technician does nothing. However, if the temperature is greater than 102.5 degrees Celsius, the technician must turn down the vat's thermostat, wait 5 minutes, and check the temperature again. The technician repeats these step until the temperature does not exceed 102.5 degree Celsius. The director of engineering department has asked you as a programmer to writes a program that guides the technician through this process. a) Write the flow chart that can be use to write the program. b) Do a program as request from the director. The expected output should be like this: Enter the substance's temperature (in Celsius): 104.7 [Enter] The temperature is TOO HIGH. Turn the thermostat down and WAIT for 5 minutes. Then take the temperature…
Problem Description:Model the bracket in ANSYS Software by using a solid 8 node plane stress element for following description. Geometry: The thickness of the bracket is 3.125 mmMaterial: Assume the structure is made of steel with modulus of elasticity E=200 GPa.Boundary conditions: The bracket is fixed at its left edge.Loading: The bracket is loaded uniformly along its top surface. The load is 2625 N/meter.(i) Plot deformed shape(ii) Determine the principal stress and the von Mises stress. (Use the stress plots to determine these) You are required to solve the above problem in Ansys APDL and submit the results IMPORTANT: Convert all dimensions and forces into SI units
The Youth Bowling Clubs Association (YBCA) is a loose group of children’s ten-pin bowling clubs that compete with inter-club competitions regularly throughout the year. It is run on an amateur basis, and each week volunteers from each of the clubs present at a competition provide a referee and scorer for the competition. As the clubs are affiliated with bowling alleys, each club takes it in turns to host the competitions, and there is a rule that no club can have a scorer or referee at a competition they are participating in. The Managing Committee of the YBCA have been organising the competitions informally for many years, and now want to put the officiating on a formal basis, which will be auditable by the Australian Bowling Association (ABA). They have passed a set of by-laws, and to ensure that the process works properly, and is fair, they have decided to commission a computer system – Official-Eze. The Committee wants the Official-Eze system to automate the process of…
You are given the task of wiring and installing lights in the attic of your house. Determine a set of subtasks that, taken together, will accomplish this. (Hint: The first subtask would be to determine the placement of the light fixtures.)