4-109. Replace the force and couple moment system acting on the beam by an equivalent resultant force and couple moment at point O. Problems 4-108/109 A- 0 y 0.2 m 1.5 m 30° 500 N 2m ↑ 200 N 1.5 m 200 N·m X

4-109. Replace the force and couple moment system acting on the beam by an equivalent resultant force and couple moment at point O. Problems 4-108/109 A- 0 y 0.2 m 1.5 m 30° 500 N 2m ↑ 200 N 1.5 m 200 N·m X

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter2: Basic Operations With Force Systems

Section: Chapter Questions

Problem 2.91P: (a) Replace the force F=2800i+1600j+3000klb acting at end A of the crank handle with a force R...

See similar textbooks

Related questions

Q: 3. Equal masses of hydrogen and oxygen are mixed. The mixture is maintained at 150 kPa and 25°C. For…

A: Masses of hydrogen= mH2 Masses of oxygen= mo2 p1 = 150 kPa and T1= 25°C. Molecular Weight…

Q: A quarter car model of an automotive vehicle suspension system is shown in Figure Q2 below, where k,…

A: m1=257.5kg m2=28.8kg k1=24.4kN/m k2=83.2kN/m we need to find The first system natural frequency i.e…

Q: Determine the moment of inertia of the cross-sectional area of the reinforced channel about the…

Q: Figure 5-51/52 Full Alternative Text 5-53. The 50-mm-diameter A992 steel shaft is subjected to the…

Q: Determine the force in each member of the loaded truss. The force is positive if in tension,…

Q: upper leg muscle 9 cm in radius). 2) Don't ever try the acorn diet, its nuts. In the tree diagrammed…

A: Given: The force exerted, F = 800 N The length of the limb, L = 2 m The diameter of the limb, r1 =…

Q: What does the lumped capacity model describe? Give an example (with a drawing) of a heat transfer…

Q: Consider a heat transfer situation. Heat flows from the hot item or area to the cold item or area.…

A: Here situation is given of two objects hot object and cold object. The heat transfer between two…

Q: 4) Determine the total hydrostatic pressure, the center of horizontal pressure and the angle of the…

A: Given the dimensions of the gate. Required: Total Hydrostatic pressure and its angle.

Q: Problem Statement Based on Problem 4-75 from the textbook. Determine the magnitude of the forces F…

Q: What is the tangential strain of the following member to the nearest 0.0001? (be sure to include the…

A: According to the given data ν=0.32 δ=0.22in L=11in We need to find Tangential strain

Q: A cylinder with a diameter D, floats upright in a liquid as shown in Figure Q4. When the Cylinder is…

A: As per Expert Guidelines, we are supposed to answer only the first three parts of the given…

Q: Current Attempt in Progress Determine the y-coordinate of the centroid of the shaded area shown. 10…

A: The figure is shown above.

Q: A WT9 x 30 structural steel T-section is loaded and supported as shown below. (a) Draw complete…

Q: Determine the velocity of block A if end B of the rope is pulled down with a speed of 9.0 m/s.…

A: Given that: Velocity at B is 9 m/s. It is required to determine the velocity of the block A.

Q: The figure shows two power cycles, A and B, operating in series, with the energy transfer by heat…

Q: 1.9 In Fig. 1.69, find the equivalent spring constant of the system in the direction of 0. K₁1 00000…

A: To find: The equivalent spring constant. Given: The spring system is shown below.

Q: Sketch a free-body diagram of each element in the figure below. Find the magnitude and direction of…

A: Given data: F=400 N

Q: n oil pump is drawing 35 kW of electric power while pumpi

A: Given: The power of motor is, Pmotor=35 kW. Density of oil is, ρ=860 kg/m3. The flow rate is, Q=0.1…

Q: EXERCISE 2.4 The collar slides over the stationary guide defined by x = ky² in the vertical plane.…

A: Given the relationship between x and y. Required: Force and reaction by slide

Q: Find the inverse Laplace transform -¹{F(s)} of the given function F(s) 20 s² + 25 Your answer should…

A: Giventhe inverse laplace transform L-1FSFS=20s2+25

Q: Two hard rubber blocks are used in an anti-vibration mount to support a small machine as -140 lb…

A: According to the given data P=140lb δ=0.23 in a=0.50im b=0.95in and c=2.70in We need to find…

Q: In the two-dimensional body illustrated, the gradient at surface A is found to be aT/ dy 1.2 m. What…

A: Given the gradient at surface A and width at A and B. Required: Gradient at surface B.

Q: 2. The apparatus shown below is designed to measure the density of an unknown fluid (p2). The two…

Q: 1. Cable AB is 65 ft long, and the tension in that cable is 3900lb. Identify the (a) x, y, and z…

Q: 5kN m 75mm 35mm 0.75m 20kN m 0.60m C G= 80 GPa =[(0-275)*-(0-2³5)*] = 2.959 x 10-6 m4 A Determine…

A: According to given data TA=+5kN.m ( using the right hand rule TB=-20kN.m G=80GPa D=75mm…

Q: ACTIVITY (1), FIND THE DISTRIBUTED LOAD A 6 kN/m 4.5 m B 3 kN/m 1.5 m-

Q: 22: The springs connecting with a rigid weightless bar as hown. The stiffness of beam (Kb) is 5 kN/m…

A: To find: The natural frequency for the system. Given: The stiffness of the beam is kb=5 kN/m. The…

Q: - 2.3 a. For the spring assemblage shown in Figure P2-3, obtain the global stiffness matrix by…

Q: 1.21 The thermal conductivity in a particular plane wall depends as follows on the wall temperature,…

Q: Find the natural frequency of the system shown in Fig. 2.55 with and without the springs k₁ and k₂…

A: Solution: Given Data: To Find: (a) Find the natural frequency when both the springs are present.…

Q: Find the magnitude and sense of the forces required along the given lines of action, A and B, for…

Q: 1'm a). b). c). 1m 0 Determine: D 3 m F = 56 N B A 1.5 m Given: Force F = 56 N Position vector TAO…

A: Given: F = 56 N rAO = {1.5i - 3j - 1k} m Required: (a). Magnitude of rAO (b). Unit vector uAO (c).…

Q: 5 mm 20 mm 5 mm Steel core E = 200 GPa Brass shell E = 105 GPa 5 mm 20 mm .5 mm 250 mm

Q: Under steady state operation, a 50 W incandescent light bulb has a surface temperature of 135°C when…

Q: 4-61. Determine the magnitude of the moment of the force F = {50i - 20j - 80k} N about member AB of…

A: Given the force vector and tripod dimensions. Required: Moment about AB.

Q: A tension test specimen had a gauge length of 2.5 in. After the test, the gauge length had increased…

A: In this problem, we will compute the uncertainty in the percentage elongation of the specimen by…

Q: The 25-kg block A rests on the 05-kg plate B as shown in Egure 1). gure -02 Mar 0.1 ▾ Part A…

Q: Example - Single cylinder 4-stroke engine The torque diagram for a single cylinder engine is shown…

A: Given1cm=100 Nm1cm=90degN=1500 rpmn=±2%σh=5 MN/m2ρ=7200 kg/m3

Q: Water jacketed compressor compresses 5 m³/min of air having an initial specific volume of 0.8m³/kg.…

A: Given data Volume flow rate = 5 m3/min Specific volume = 0.8m3/kg The increase in enthalpy =…

Q: Q 2- The Nusselt number for flow in a tube is given by Nu = C₁ Rea Prb where the constants, C1, a,…

A: Given: The diameter of tube, d = 10 cm = 0.1 m The length of tube, L = 30 cm = 0.3 m Prandtl number,…

Q: 1. (1 point) If F is in the -y direction and has a magnitude of 4kN, what is the force in bar A A.…

A: GivenF=4kN

Q: EXAMPLE 1.2 1.5 m Kim-im-im- Determine the support reactions at A and the axial force in member DC.

Q: A machine component made of a ductile material is subjected to a variable loading with Omin=-50 MPa…

A: We have to solve above question Determine the factor of safety Variable load= -50 mpa and 50 mpa…

Q: (b) Show that the lightest cantilever beam of length (b) L and square section (area free) that will…

Q: The pipe assembly is subjected to the action of a wrench at B and a couple at A. S system to a…

A: System is subjectd to wrench at B and couple at A F= 40 N To find out:- 1. Simplify the…

Q: A flow develops between two parallel plates, each of area (A). The plates are separated by a gap (H)…

A: Given: The velocity of the flow is: →uy=12μ∆PLHy-y2±UTyH In the case 1 there is no pressure drop so…

Q: give and explain an example of Application of refrigeration (Food Preservation and PHARMACEUTICALS…

A: Refrigeration In order to decrease the temperature of the refrigerating space or material and then…

Q: A pressure is measured with a sensor with range-1 to 10 bars. If it generates a current with range…

Q: For the following automatic control systems commonly encountered in daily life, identify the devices…

A: Given: Automatic sprinkler system for fires Automobile cruise speed control Refrigerator…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

4-109. Replace the force and couple moment system acting on the beam by an equivalent
resultant force and couple moment at point O.
Problems 4-108/109
A
O
y
0.2 m
1.5 m
30°
500 N
2 m
200 N
1.5 m
200 N·m
X

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Given data

VIEW

Solution

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

4:48 68 O E B18 Statics_Moment.. o 240 N 2. A prybar is used to remove a nail as 15° shown. Determine 350 mm the moment of the 240 N force about the point o of 65° contact between the prybar and the small support block. 30 mm PROBLEMS 240cos10=236.35 N Mo=? 240 N 15° 65 240sin 10=41.68 N 350 mm M=236.35(0.35) +41.68(0.03)=83.97 N -m 65 (clockwise direction) 30 mm PROBLEMS 900 mm 700 mm 3. An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the F 300 mm effect of a slam dunk. Determine the moments of the force F about point O and about point B. Finally, locate, 3050 mm
Problem Statement Based on Problem 4-61 from the textbook. Determine the magnitude of the moment of the force F about the base line AB of the tripod. a a=4.9m b=0.5m i= 50 N J= -20 N Unique Values for Each Student: K=-75 N 1.5 m X 2 m 2 m b D B Z 1 m a A- 2.5 m y
Q1/Replace the force and couple system acting on the member in Figure below by an equivalent resultant force and couple moment acting at point A, and find where its line of action intersects the beam, measured from point A. -2 m- 40 kN E -2 m 50 kN H I D 2 m- C 1.5 m 1.5 m B 30 kN 40 kN 1.5 m 1
Calculate the moment Mg of the 675-N force about the bolt at B. Simplify your work by first replacing the force by its equivalent force- couple system at A. The moment is positive if counterclockwise, negative if clockwise. Assume F = 675 N, r = 165 mm, h = 505 mm, 0 = 21% = 30° Answer: MB = i 0 h F N-m
Q5/ Determine the vector expression for the moment Mo of the 600-N force about point O. The design specification for the bolt at O would require this result. Ans. M. - 55.2- 13.86j +40.8k N•m 150 mm 140 mm 50 mm 60 130 mm 45 600 N
Two shafts of a gearbox are subjected to the torques as given in the figure. Replace these couples with a single equivalent couple, specifying its magnitude and direction of its axis. M2=38 lb-ft M1=18 lb-ft
Problem Statement Based on Problem 4-151 from the textbook. The pipe assembly is subjected to the action of a wrench at B and a couple at A. Simplify this system to a resultant wrench and specify the locaiton of the wrench along the axis of pipe CD, measured from point C. F = 42.8 N 0.6 m X Z C 0.8 m (60k) N 0.25 m {-401) N B 0.25 m - Fi 0.3 m 0.7 m V-60k) N A 0.3 m Fi 0.5 m D y
Based on Problem 4-9 from the textbook. The cable exerts a force P at the end of the crane boom. Determine the position of the boom so that force P creates a maximum moment about point O. What is this moment? Unique Values for Each Student: A P= 5.4 KN x= 11.5 m Y = 6-8 m P B 0 1'm O M IMI 1
Determine the magnitude and direction of the couple moment acting on the gear shown in the Figure. F = 600 N 30° 0.2 m 30 F= 600 N
Calculate the moment Mg of the 895-N force about the bolt at B. Simplify your work by first replacing the force by its equivalent force- couple system at A. The moment is positive if counterclockwise, negative if clockwise. Assume F = 895 N, r= 155 mm, h = 490 mm, 0 = 30% = 38° OC Answer: Mg = i 0 h N-m
A twist of 4 N.m is applied to the handle of the screwdriver. Resolve this couple moment into a pair of couple forces F exerted on the handle and P .exerted on the blade 4 N-m 30 mm 8 mm F=133.33 N and P-500 N O F=133.33 N and P-800 N O F=0.133 N and P=0.5 N O F=133.33 KN and P-800 KN O
(a) Replace the force F=2800i+1600j+3000klb acting at end A of the crank handle with a force R acting at O and a couple-vector CR. (b) Resolve R into the normal component P (normal to the cross section of the shaft) and the shear component V (in the plane of the cross section). (c) Resolve CR into the twisting component T and the bending component M.