1. Consider the network shown below 1841 1841 Routero Router1 PC-PT PC-PT PCO PC1 2. Choose a private IP block and assign a suitable IP address to every PC/interface in the above diagram. Write the IP addresses in the figure above. Add a photo of the network after you write down the IP addresses to it. 3. Build the network shown in step 1. 4. Configure the IP address of the first computer with IP address and gateway as per your chosen IP addresses in step 2.

Q: Q4) For the network in Figure 3, repeat drawing the network on your answering paper and answer the…

A: B)1.There are 2 different networks that are Router and Switch. 2.Need ip address and mac address of…

Q: Consider the network topology shown below. GO/0 PC-A R1 Device IP address / prefix 2001:C:11:10/64…

A: Given question has asked to consider the given topology  and answer the following: The IPV6 address…

Q: 2 Consider a network of Class C with network address 200.1.1.0 a. How many total IP addresses are…

A: Consider a network of Class C with network address 200.1.1.0 a. How many total IP addresses are…

Q: What happens to MAC addresses as a packet travels from one network to another? What happens to IP…

A: A network consists of two or more computer that are linked in order to share resources and exchange…

Q: What happens to MAC addresses as a packet travels from one network to another? What happens to IP…

A: 1. The switch knows which outbound port the MAC address listed as the layer 2 destination is on,…

Q: Q) suppose you have 54 PCs, which is the better subnets should be used for the Network Address…

A: The answer provided below has been developed in a clear step by step manner.

Q: Q) suppose you have 54 PCs, which is the better subnets should be used for the Network Address…

A: Suppose you have 54 PCs,which is the better which subnets should be used for the network address…

Q: Q) suppose you have 54 PCs, which is the better subnets should be used for the Network Address…

A: Suppose you have 54 PCs,which is the better which subnets should be used for the network address…

Q: 4.03-2. Network Address Translation (b). Consider the following scenario in which host 10.0.0.1 is…

A: HERE ARE THE ANSWERS... 1)D 2)E 3)B 4)C 5)B 6)C 7)D 8)D

Q: 1. Subnetting IP Networks - Given the address block of 192.168.90.0/24,create an IP addressing…

A: Given:

Q: Q) suppose you have 54 PCs, which is the better subnets should be used for the Network Address…

A: Subnetting two things: it gives us a way to break up networks into subnets, and allows devices to…

Q: Assume that a private internet requires that the messages at the application layer be encrypted and…

A: GIVEN: Consider a private internet. In this network, the messages are needed be encrypted and…

Q: Assume that a private internet requires that the messages at the application layer be encrypted and…

A: While sending a message through protocol suite, there is no need of additional layer to encrypt and…

Q: An ISP is granted a block of addresses starting with 150.80.0.0/14 . The ISP wants to distribute…

A: The first group has 50 customers, each needs 1024 ip addresses so, each host will contain (log21024)…

Q: An ISP is granted a block of addresses starting with 150.80.0.0/14. The ISP wants to distribute…

A: The first group has 50 customers, each needs 1024 ip addresses so, each host will contain (log21024)…

Q: An ISP is granted a block of addresses starting with 150.80.0.0/14. The ISP wants to distribute…

A:

Q: An ISP is granted a block of addresses starting with 150.80.0.0/14. The ISP wants to distribute…

A: Network Address Block: 150.8.0.0/14 Subnet Mask: 255.252.0.0/14 No. of Hosts/Subnet  262144 Number…

Q: B4. Given the topology below with IP address 172.9.125.128/25, create an IP plan using VLSM and fill…

A: The answer is given below:-

Q: Suppose you have been given this classful IP address 130.1.1.8. a. You want to create a network of…

A: A.  130.1.1.8 belongs to class B where network 5is 16 and host bits is 16. Out of 16 host bits, some…

Q: As network designer, you are asked to use the network IP address 192.168.3.0 to create four (4)…

A: GIVEN: NETWORK IP ADDRESS : 192.168.3.0 (Class C) Create 4 subnet  Find  Network IP First IP Last…

Q: Consider IP address and answer the following questions; “ 1.1.25/21” and mask is “255.255. 248.0” ,…

A: (i). 1. This is a class A address so number of subnets = 2mask bits−8 221-8 = 213 = 8192 8192…

Q: Subnetting IP Networks - Given the address block of 192.168.90.0/24,create an IP addressing scheme…

A: Answer: To provide enough address area for thirty hosts, we want to go away five bits. Use the…

Q: What are peer to peer to networks? If we need to connect two PCs directly with each other, what are…

A: A PC network is a gathering of PCs that utilizes a bunch of regular correspondence conventions over…

Q: Question 4 Given a class C network IP address 197.20.11.0 and subnet mask is 255.255.255.240. a. How…

A: Subnetting is the process of diving a network into small networks and is a common task on IPV4…

Q: Let’s consider you have a Class C IP address 204.15.5.0/24. You have to determine whether it is…

A: Given Data : Class C  IP address 204.15.5.0/24 Since the address is of Class C, the number of host…

Q: PC1 PC2 IP: 192.168.1.2 IP: 192.168.1.3 Refer the above diagram. Scenario Two PC's are connected to…

A: Solution: Que:  Does the switch need an IP address for PC1 to communicate with PC2? Ans:  The IP…

Q: Consider the following network. 223.1.2.0/22 Assuming that all hosts in the network are…

A: (1) As there are four different routers, each host is connected to one of the routers, the public IP…

Q: Add a DHCP server to the network with network ID of 223.12.12.0/24. Configure the DHCP server so…

A: Given: Add a DHCP server to the network with network ID of 223.12.12.0/24. Configure the DHCP…

Q: Match the TCP/IP model layer to the description. Note that a layer can be used more than once. а. a…

A: The answer is

Q: Design a network that can provide étwork that can provide 5,563 IP address (i.e. the network an host…

A: Here total number of host requirement is 59000 Therefore minimum of host bits required is 16 bits.…

Q: The networking device that operates on Layer 2 of the OSI model and can forward packets according to…

A: Layer 2 is the data link layer that uses packet switching.

Q: 1. Write the required steps to setup a wireless LAN network using your computer. Include screen…

A: Note:- As per our rules, we are allowed to answer only first question of multiple questions or first…

Q: 1. Create a network as shown in the diagram below: You must use CISCO Packet tracer to build the…

A: ANSWER:-

Q: Lab - Build a Simple Network Topology Addressing Table Device Interface IP Address…

A: Given The answer is given below.

Q: Consider the all O's subnet as useable and the all 1's subnet as not useable 1. Host IP Address…

A: The Answer is in Below steps

Q: the IP 135.11.2.96/12, efficiently figure out the network addresses of the following host…

A: 135.11.2.96/12 /12 means number of network address bits is 12 and number of host bits is 20. For…

Q: Suppose you have been given this classful IP address 130.1.1.8. a. You want to create a network of…

A: A.  130.1.1.8 belongs to class B IP address where # of network bits is 16 and # of host bits is 16.…

Q: This is Networking subject, Fixed length subnet mask (FLSM) Subnetting in IPv4 Network design…

A: Suppose an IPv4 network 172.30.0.0/16.Subnet Mask : 255.255.0.0 because /16 is given IP Address =…

Q: Create an IP address plan as efficiently as possible for the network shown below. The address space…

A: The answer is

Q: Create an IP address plan as efficiently as possible for the network shown below. The address space…

A: The answer is

Q: Sections 4.5.7 Lab - Build a Simple Network (do it in Packet Tracer) In this lab, you will…

A: GIVEN: Lab - Build a Simple Network (do it in Packet Tracer) In this lab, you will complete the…

Q: Solve the following IP address problems: Q1. Given a Class A IP address 110.0.0.0 - What is the…

A: Given: Solve the following IP address problems:Q1. Given a Class A IP address 110.0.0.0- What is the…

Q: 1. You work for a company using a given IP network address for their internal networks. You need to…

A:

Q: QI/Fill (5) the following blanks: 1. IPV4 are bits in length; this gives maximum of addresses. 2.…

A:

Q: QI//Fill (5) the following blanks: 1. IPV4 are bits in length; this gives maximum of addresses. 2.…

A: All fill in the blanks are as follows:

Q: QI/Fill (5) the following blanks: 1. IPV4 are bits in length; this gives maximum of addresses. 2.…

A: Internet Protocol version 4 is the version of the Internet Protocol. It is one of the core protocols…

Q: As a network administrator you are required to design the addressing scheme for the network shown in…

A: The arrangement of a network that comprises nodes and connecting lines via sender and receiver is…

Q: QUESTION 1 Layer 3 confidentiality implies that O IP packet payload is encrypted. O IP packet header…

A: Layer 3: In OSI reference model Network layer is the layer 3. This network layer is responsible for…

Q: A Network administrator nas been given a range of Class C IP address 192.168.1.0 /24. He has to…

A: 192.168.1.0 /24 means number of network bits is 24 and therefore number of host bits is 8. For…

Q: Given a class C network IP address 197.20.11.0 and subnet mask is 255.255.255.240. How many bits…

A: Note: As per the bartleby policy we can answer only three subparts. Given:   Given a class C network…