1. A crossflow heat exchanger, one fluid mixed and one unmixed (oil in tubes and steam in shell), is used to heat an oil in the tubes (c = 1.9 kJ/kg°C) from 15°C to 85°C. Steam (5.2 kg/s, c = 1.86 kJ/kg°C) blows across the outside of the tube, enters at 130°C and leaves at 110°C. U = 275 W/m²K. Calculate A. [10.84 m²]

1. A crossflow heat exchanger, one fluid mixed and one unmixed (oil in tubes and steam in shell), is used to heat an oil in the tubes (c = 1.9 kJ/kg°C) from 15°C to 85°C. Steam (5.2 kg/s, c = 1.86 kJ/kg°C) blows across the outside of the tube, enters at 130°C and leaves at 110°C. U = 275 W/m²K. Calculate A. [10.84 m²]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

3.13 Air at 2 kg/s and 27°C and a stream of water at 1.5 kg/s and 60°C each enter a heat exchanger. Evaluate the exit temperatures if A = 12 m², U = 185 W/m²K, and: a. The exchanger is parallel flow; b. The exchanger is counterflow [Tħout = 54.0°C]; c. The exchanger is cross flow, one stream mixed; d. The exchanger is cross flow, neither stream mixed. [Thout = 53.62°C]
a. 5000kg of liquid A (?? 2.4 kJ/kg-deg) per hour is cooled from 90 C to 60 C through a counter flow heat exchanger. Liquid B (?? 1.7 kJ/kg-deg) is used as coolant, which is available at 35 C. The heat transfer surface area is 5 ?2. If the flow of coolant is 4000 kg/hr. Determine:i) Outlet temperature of the coolant (3.5marks)ii) Overall heat transfer coefficient (3.5marks)b) Two well-known statements of second law of thermodynamics – one on the conversion of heat energy, and the other about the transfer of heat appear to be unconnected at first sight, but in fact, they are equivalent in all aspects. Write down the statements and establish their equivalence. (5marks)c) A nozzle is used to increase the velocity of steady flow stream. The parameters at inlet and exit from the nozzle are given. (5marks)PARAMETERS INLET EXIT Enthalpy 3000 kJ/kg 2770 kJ/kgVelocity 60 m/s ?Area ?. ? ?? ?Specific volume 0.185 ?. ??? ??/??Calculate velocity of fluid as it leaves the nozzle, rate of flow of…
A heat exchanger is used to cool oil (with cp = 2.2 kJ/kg.°C) from 170 to 50°C by water (with cp = 4.18 kJ/kg.°C) that enters the heat exchanger at a rate of 2 kg/s and inlet temperature of 10°C. If the flow rate of the oil is 1.5 kg/s, determine the exit temperature of water and the heat transfer rate from the oil.
A well-insulated heat exchanger is to heat water (cp = 4.18 kJ/kg-°C) from 25°C to 60°C at a rate of 0.5kg/s. %3D The heating is to be accomplished by geothermal water (cp = 4.31 kJ/kg-°C) available at 140°C at a mass flow rate of %3D 0.5 kg/s. What is the temperature of exit Brine. Water 25°C Brine 140°C 60°C
2. A heat exchanger like that is used to heat an oil in the tubes (c = 1.9 kJ/kg °C) from 15-C to 85 °C. Blowing across the outside of the tubes is steam that enters at 130-C and leaves at 110°C with a mass flow of 5.2 kg/sec. The overall heat-transfer coefficient is 275 W/m² °C and c for steam is 1.86 kJ/kg C. Calculate the surface area of the heat exchanger (Holman, 2002). 130 85 Steam Oil 110
1. A thin-walled double pipe, counter-flow heat exchanger is to be used to cool oil (Cp = 2.2 kJ/kg.ºC) from 150 °C to 40 °C at a rate of 1.4 kg/s by water (Cp= 4.18 kJ/kg. °C) that enters at 20 °C at a rate of 2.3 kg/s. The diameter of the tube is 13 cm and its length is 60 m. Determine the overall heat transfer coefficient of this heat exchanger using
A heat exchanger is heating water from 50 0 F to 160 0 F using steam on the shell at atmospheric pressure condensing at 212 0 F. If the overall U is 710 BTU/(hr 0 F ft2) and the exchange rate is 9,000,000 BTU/hr, what tube area is needed?
An air cooled refrigerant condenser (similar to the ones used for home air conditioners) is shown, The system condenses 0.1 kg/sec of 60 C R134A refrigerant. Air temperature rises by 5 C passing over the coils. Calculate the mass flow rate of air pushed through the condenser.
A cross flow heat exchanger (Both fluids are mixed) Is used to heat oil in the tubes (c=1.8 kj/kg · ◦c) from 15◦c to 85◦c with a mass flow of 0.73kg/sec. blowing across the outside of the tubes is steam that enters at 130◦c and leaves at 110◦c with a mass flow of 5.3 kg/sec. The overall heat-transfer coefficient is 270 w/m2◦c and c for steam is 1.96kj/kg◦c. The surface area of the heat exchanger is 12 m2. Calculate effectiveness of this heat exchanger. (Note: Select suitable formula form formula sheet)
Q.2. Air enters a steady-flow heat exchanger with a mass flow rate of 2 kg/s as shown in Figure. Determine (a) the rate of heat transfer to the air in the heat exchanger, (b) the power output from the turbine assuming no heat loss, and (c) the velocity at exit from the nozzle. (Cp atr = 1.005 kJ/kg. K) T=600 C T- 12 C V=3 m/s Air Нeat v-3 m/s Exchanger Turbine T= 200 C V - 25 m/s T= 160 C Nozzle
Q1] A shell and tube heat exchanger is used to heat water (C = 4236 J/kg. °C) from 80°C to 150°C at a rate of 12.5 kg/s by hot gas that enters the exchanger at 350°C with a rate of 20.36 kg/s. The overall heat transfer coefficient is 290 W/m² °C. The gas making 2-shell passes and the water making 4-tube passes. Calculate the heat transfer surface area (Cp (gas) = 1.04 kJ/kg.°C). heat flux: (a) by
Hot gases (c=1.10 kJ/kg.K) enters an adiabatic heat exchanger at 237°C & 130 kPa while Saturated liquid water enters the heat exchanger at (1.0 MPa) and leaves as saturated vapor. What is the mass flow rate of water (kg/minute) if the amount of heat transfer is 567 kW?