You have a circuit with a battery hooked up to 2 capacitors in Parallel. The battery has a voltage of 4.3 V. The capacitors have a value of C1 = 40.0 µF and C2 = 25.0 µ F. While finding the actual voltage is very helpful, it's hard to use this as a prediction because not all batteries are the same. So one way to look at this is a percentage. Even if the voltage of the battery is different, the percentage of the voltage should be the same regardless. Find the percentage of the battery voltage that is across capacitor 1. To find percentages: • Find the voltage across the specific capacitor just like previously • Divide this voltage by the voltage of the battery • Multiply your answer by 100 to turn it into a percent Your answer should include: 2 Decimal Places Correct SI Units Your Answer:

You have a circuit with a battery hooked up to 2 capacitors in Parallel. The battery has a voltage of 4.3 V. The capacitors have a value of C1 = 40.0 µF and C2 = 25.0 µ F. While finding the actual voltage is very helpful, it's hard to use this as a prediction because not all batteries are the same. So one way to look at this is a percentage. Even if the voltage of the battery is different, the percentage of the voltage should be the same regardless. Find the percentage of the battery voltage that is across capacitor 1. To find percentages: • Find the voltage across the specific capacitor just like previously • Divide this voltage by the voltage of the battery • Multiply your answer by 100 to turn it into a percent Your answer should include: 2 Decimal Places Correct SI Units Your Answer:

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Consider the circuit shown in the figure below. The four capacitors have capacitances C1=15μF, C2=16μF, C3=19μF, C4=13μF and are connected to a battery of voltage V=39Volts. When all capacitors are fully charged, determine the voltage across C4. Express your answer in units of Volts using one decimal place.
Consider the circuit shown in the figure below. The four capacitors have capacitances C1=10μF, C2=13μF, C3=77μF, C4=19μF and are connected to a battery of voltage V=46Volts. When all capacitors are fully charged, determine the charge on C4. Express your answer in units of μF using zero decimal places.
For the circuit shown in figure below, the capacitors were each discharged before beingconnected to the voltage source. Find,(a) the equivalent capacitance(Ceq) of the combination.(b) the voltage across each capacitor(i.e.V1=?,V2=?V3=?).
Four capacitors are connected as shown in Fig. 1. C1 = 4.50 μF, C2 = 7.50 μF, C3 = 2.50 μF and C4 = 4.50 μF. V = 20.0 V. (a) What is the equivalent capacitance for this circuit? Enter your answer in μF. (b) What is the voltage across capacitor 2? (c) What is the voltage across capacitor 3?
In the schematic below two batteries are in series and drive current through the circuit as shown. The first resistor has a voltage drop AV₁ = 1.2 V, the middle resistor has a resistance of R = 64, and the last resistor has a voltage drop AV₂ = 1 V. Given these parameters, what is the magnitude of current flowing through the circuit in milli-amps (mA)? Giver your answer to 3 significant figures. AV, ww 3.0 V 4.5 V ww ΔV, ww R
A capacitor has an initial charge of 10 µC. It is observed that after discharging for 2ms through a resistor of 8.7 kn, the charge of the capacitor is now only 8.1 μC. What is the capacitance of the capacitor? Express your answer in micro Farad, and keep three significant digits. Answer:
Calculate the total capacitance and total charge of the circuit in Figure 1.a. Assume all capacitors are 10 microfarad and 20 V battery as power source.
Four resistors (R1=A ohms, R2=B ohms, R3= C ohms, R4=D ohms) are connected in parallel. Find the current in R2 if the total voltage is 220 V. If the total voltage in the previous item is the potential difference between the two plates of a parallel plate capacitor, what is the capacitance if the amount of charge in one plate is A nanocoulombs?
Use "E" as the symbol for Voltage. R, R, 3. If I = 0.75 A, R1 = 6 Q, and R2 = 15 Q, what is.. a. the voltage across R1? : b. the voltage across R2? : c.the voltage of the battery?! :: 4.5 V : 11.3 V :: 15.8 V :: 6.8 V :: 2.7 V : 9.7 V
If you examine your smartphone battery, you will likely see two numbers: the battery's "capacity" labeled in mAh (milliamps x hours or milliamp-hours), and the battery's voltage or potential difference in V (volts). 1. What physical quantity is the battery's "capacity" measuring? Explain how you can tell. This answer has not been graded yet. 2. Suppose your phone's battery has a capacity of 2500 mAh and a potential difference of 3.7 V. What is the amount of charge, in C (coulombs), that is stored in your smartphone battery when it's fully charged? Charge = 3. Smartphone chargers are usually labeled with their current output in A (amps). Suppose your charger delivers a current of 1.1 A. If your phone's battery is completely drained, how long will it take to fully charge the battery using your charger? Charging time = hours 4. Smartphones are advertised with a certain amount of "talk time", i.e., how long the phone's battery will last if you are making a call. If your phone is advertised…
I have attached the formulas and values tahat we use for reference. Please include a detailed solution. Thank you! Question:When two resistors A and B are connected in series, the total resistance is 36 ohms. When connected in parallel, the total resistance is 8 ohms. What is the ratio of the resistance RA to resistance RB? Assume RA < RB and express the answer in decimal form.
What is the output voltage of a 3 V lithium cell in a digital wristwatch that draws 0.32 mA, if the cell's internal resistance is 1.8 Q? Hint: Draw a circuit diagram of the lithium battery in your notebook. Label all currents and voltages. Enter a value correct to 5 significant figures. V₂ = V