The rod shown below is made of two different materials. Segment AB is made of aluminum (G = 3.9 × 106 psi). Segment BC is bonded to segment AB and is made of brass (G= 5.6 × 106 psi). Segment BC is hollow and has an inner diameter of d₁ = 1.0 in. External torques are applied to the rod at point B and point C. Let L₁ = 53.0 in, LB = 42.0 in, dA dд = 3.0 in, dB = 2.2 in, TB = 9.0 kip in, and Tc = 10.0 kip in . • . B di TB Tc LA LB

The rod shown below is made of two different materials. Segment AB is made of aluminum (G = 3.9 × 106 psi). Segment BC is bonded to segment AB and is made of brass (G= 5.6 × 106 psi). Segment BC is hollow and has an inner diameter of d₁ = 1.0 in. External torques are applied to the rod at point B and point C. Let L₁ = 53.0 in, LB = 42.0 in, dA dд = 3.0 in, dB = 2.2 in, TB = 9.0 kip in, and Tc = 10.0 kip in . • . B di TB Tc LA LB

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Q2. Two members of Aluminium AB and BC are connected as shown in the Figure Q2.Point A is a fixed end support, point B is a pin connection and point C is a pin support. The cross section of member AB is 120 x 120 mm and member BC is a rod of 120 mm diameter. A forced P is applied to the connection B. Given the young modulus, E = 70 kN/mm² for both members. (a) Prove that both members are slender (Member is slender when the slenderness ratio, λ >90) (b) Determine the maximum load, P that can be carried by the structure. (c) Determine the allowable load, P if the factor of safety is 3.0. 4m P KN B 2m 2m 1m
A two pinned end bars AB (copper) and BC (aluminum) is subjected to a horizontal force P = 90KN applied at pin B %3D as shown in the figure, determine the horizontal displacement of pin B. Aluminum: L= 1.5m, A= 1000mm2, E= 70 GPa Copper: L= 2.0m, A= 850mm², E= 120 GPa Degree: 45° Alumaum L-15m A=1000 mm E-70 GPa >P=90 kN Copper L=2.0m Aa550 mm E=120 GPa
Axial loads are applied to the compound rod that is composed of an aluminum segment rigidly connected between steel and bronze segments. What is the stress in each material given that P = 15 kN? Specify whether tension or compression. Bronze Aluminum Steel A=400 mm? A=600 mm? A= 300 mm? 2P 3P 4P P -3 m + 5 m -4m
Q2: The pin-connected structure shown in figure below consists of a rigid beam ABCD and two supporting bars. Bar (1) is a bronze alloy [E= 105 GPa] with a cross-sectional area of A1= 290 mm2. Bar (2) is an aluminum alloy [E=70 GPa] with a cross-sectional area of A2= 650 mm?. If a load of P= 30 kN is applied at B, determine: (a) the normal stresses in both bars (1) and.(2) (b) the downward deflection of point B on the rigid bar. (1) 2250 mm 670 mm 480 mm 650 mm 1600 mm P = 30 kN
The two shafts are made of A-36 steel. Each has a diameter of 21 mm and they are connected using the gears fixed to their ends. Their other ends are attached to fixed supports at A and B. They are also supported by journal bearings at C and D, which allow free rotation of the shafts along their axes. A torque of 500 Nm is applied to the gear at E as shown in the figure below. The shear modulus of elasticity for A-36 steel is 75 GPa. (Figure 1) Figure 50 mm 100 mm 1.5 m B 1 of 1 0.75 m 500 N-m Part A Determine the rotation of the gear at E. Express your answer using three significant figures. OF AΣo↓ vec PE=0.02897 Submit Previous Answers Request Answer Provide Feedback X Incorrect; Try Again; 8 attempts remaining ? rad
The rigid bar BDE is supported by two links AB and CD. Link AB is made of aluminum (E = 70 GPa) and has a cross-sectional area of 519 mm2; link CE is made of steel (E = 200 GPa) and has a cross-sectional area of 633 mm2. For the 36 kN force shown, determine the deflection of B (mm) *deflection should have a negative sign if compression and positive if tension. Also, your final answer should have two decimal places
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Two members, each consisting of a straight and a quarter-circular portion of rod, are connected as shown and support a load P=135.0 lb at A P -6 in -3 in--3 in- B Determine the internal forces at point J The axial force Fis[ The shear force Vis The bending moment Mis E lb 4 Problem 07.156.b - Determine internal forces. lb A -6 in. D 3 in O 3 in. 3 in. lb in acting in the (Click to select) direction.
An aluminum bar having a cross-sectional area of 160 mm2 carries the axial loads as shown in the Figure below. Assume that the bar is suitably braced to prevent buckling and E = 70000 MPa. The length of each bars are follow: B1= 0.8 m; B2 = 1.0 m; B3= 0.6 m. Determine the axial load acting on bar B3 in kN. 35KN В1 B2 B3 10KN 15KN 30KN
The assembly consists of three titanium (Ti-6A1-4V) rods and a rigid bar AC. The cross-sectional area of each rod is given in the figure. If a force of 60 kip is applied to ring F and the allowable stress of the material is 67 ksi, determine the cross-sectional area of each rod and the horizontal displacement of point F. B AAB = a in² AL 6 ft E 1 ft2 ft- AEF=2a in² 2 ft FO 60 kip D ACD = 1.5a in² C
The torsional assembly shown in figure below consists of a solid bronze (G3 = 45 GPa) shaft CD and a hollow aluminum alloy (GA = 28 GPa) shaft EF that has a steel (Gs 80 GPa) core. The ends C and F are fixed to rigid walls, and the steel core of shaft EF is connected to the flange at E so that the aluminum and steel parts act as a unit. The two flanges D and E are bolted together, and the bolt clearance permits flange D to rotate through 0.03 rad before EF carries any of the load. Determine the maximum shearing stress in each of the shaft materials when the torque T = 54 %! kN-m is applied to flange D. Hint: 0:otal Oc/p + 6D/E + OE/F= 0 Answer: Shear stress of aluminium, bronze and steel are 52.9 MPa, 100.0 MPa and 75.6 MPa, respectively Bronze T-54 kN-m Alum. alloy 2 m Steel (a) 1.4 m F 120 mm 120 mm
In the figure shown, the AB part of the rod is made from brass while the BC part is fabricated from aluminium, both parts are restrained at the ends. Find: 1) The normal stresses OAB and OBC + when the temperature is increased to 42°C. 2) The deflection at point B (8B) Brass: ab=20.9*10-6 1/°C, Eb=105GPA Aluminum: aa=23.9*10-6 1/°C, Eal=72GPA //// A 60 mm diameter 1.1 m B 40 mm diameter 1.3 m Aluminum Brass
Problem 3: Inside a steel tube, 2.4 meters long, 34 mm radius, and 1.5 mm thick, 32.5A circular bar made of aluminum with a radius of mm is inserted and these two materials arethey are linked together to form a cross section that will work. This cantilever beam obtained from end Ait is fixedly supported. This cantilever beam,A torque of T = 900 Nm from end B(torque) is applied. Stiffness modulus of steel, Strength= 77 GPa and the stiffness modulus of aluminum Gal = 26Since GPa is the rotation at point BWhat is the (torsion) angle? Calculate.