Required: 1. Compute the Drying Department's equivalent units of production for pulping and conversion in March. 2. Compute the Drying Department's cost per equivalent unit for pulping and conversion in March. 3. Compute the Drying Department's cost of ending work in process inventory for pulping, conversion, and in total for March.
Q: The Fabricating Department started the current month with a beginning Work in Process inventory of…
A: Direct Material is defined as those materials that go into making a product or materials that can be…
Q: The Combate Corporation uses the raw materials and in process (RIP) inventory account. At the end of…
A: Inventory includes: Raw material Work in process Finished goods
Q: A department adds all raw materials to a process at the beginning of the process and incurs…
A: Calculate equivalent units for Conversion costs:
Q: Iqbal Corporation uses the weighted-average method in its process costing system. Operating data for…
A: Units completed and transferred out = Beginning work in process inventory + Transferred in from the…
Q: The following information concerns production in the Finishing Department for May. The Finishing…
A: a.
Q: Sheffield Company has the following production data for selected months. Ending Work in Process…
A: Equivalent units are those on which the cost has been incurred. For example, 100 units that are 60%…
Q: Process Cost Journal Entries In October, the cost of materials transferred into the Rolling…
A: Process costing is a method of cost accounting which is used to where the production is…
Q: Costs per Equivalent Unit and Production Costs The following information concerns production in the…
A: d. Computation is represented as below: Hence, the cost for each equivalent unit of direct…
Q: Determine the number of equivalent units of production in the June 30, Finishing Department…
A: Inventory: Inventory can be defined as the goods that are being available within the organization…
Q: The Work in Process Inventory account had a beginningbalance of $4,200 on February 1. During…
A: Inventory refers to the raw materials, work-in-process, and the finished goods products that are…
Q: Kurtulus Corporation uses the weighted-average method in its process costing system. Data concerning…
A:
Q: much is the cost of goods sold for the month of December? * GHY Company has a cycle time of 2 days.…
A: Cost of Goods sold The calculation of cost of goods sold is one of the important process in the…
Q: variable cost per equivalent unit for conversion for the month.
A: When the percentage of cost incurred for a unit is different we are required to calculate equivalent…
Q: Information for Nichols Manufacturing Company for the month of May is as follows: Beginning work…
A: Answer :
Q: Inacio Corporation uses the weighted-average method in its process costing system. Data concerning…
A: Formula: Equivalent units = Units transferred to the next department during the month + ( Ending…
Q: A company began the month of December with work in process inventory of 4,880 units that are 100%…
A: FIFO is the most the most common method used in valuing Inventories. Under FIFO Method, it is…
Q: A department adds raw materials to a process at the beginning of the process and incurs conversion…
A: Equivalent units of products concept came in to existence when some units are not fully completed at…
Q: .. Prepare a cost of production report, and identify the missing amounts for Work in…
A:
Q: The following information concerns production in the Forging Department for November. All direct…
A: a.Determine the number of units transferred to the next department.
Q: Department M had 2,700 units 58% completed in process at the beginning of June, 11,500 units…
A: In terms of accountancy, inventory can be defined as a form of asset which represents the value of…
Q: Narver Corporation uses the weighted-average method in its process costing system. Operating data…
A: Equivalent units for conversion costs using weighted-average method = Units completed + [Ending WIP…
Q: production process. The data below summarize the department's operations in January. Percent…
A: The conversion cost per unit is calculated as total conversion costs divided by number of equivalent…
Q: Cost of beginning work in process inventory completed in November. b. Cost of units transferred to…
A: Requirement a: Calculate costs of beginning work in process inventory completed in November.
Q: Elmo has the following information for the month of October, its first month of operations Costs…
A: Hi! Thank you for the question. As per the honor code, We are allowed to answer three sub-parts at a…
Q: Raider Corporation uses the weighted-average method in its process costing system. The The data…
A: Conversion cost can be calcualted by multiplying equivalent units of production with the allocation…
Q: The company uses the weighted-average method in its process costing system. Data for March for the…
A: The question is based on the concept of Cost Accounting. As per the Bartleby guidelines we allowed…
Q: Preparing journal entry The Mixing Department’s production cost report for May shows $12,500 in…
A: Journal entry: Journal entry is a set of economic events which can be measured in monetary terms.…
Q: May Company uses the weighted average method in its process costing system. Operating data for the…
A: Equivalent units of products concept came in to existence when some units are not fully completed at…
Q: The above information (picture) concerns production in the Forging Department for November. All…
A: Since you have asked multiple sub-parts we will solve first three sub-parts for you if you want to…
Q: The Kirkland Department of Culver Company began the month of December with work in process inventory…
A: It is assumed that weighted average method is used to calculate equivalent unit production. Under…
Q: February Cost Analysis Determine the cost per unit of direct materials and for conversion for the…
A: The cost per unit is calculated as total cost divided by number of units.
Q: Steven Company uses the FIFO method in its process costing system. The following data were taken…
A: Total cost of units transferred out of the department during March = Beginning work-in-progress…
Q: The assembly department had 700 units 35% completed in process at the beginning of June, 10,000…
A: Conversion costs These are the costs that are incurred at intervals of changing the stuff ( WIP)…
Q: A department adds raw materials to a process at the beginning of the process and incurs conversion…
A: Equivalent units of Production: Equivalent units of production includes the completed units of…
Q: The debits to Work in Process-Assembly Department for May, together with data concerning production,…
A: The equivalent units are calculated on the basis of percentage of the work completed during the…
Q: HIRDED HERE No materials are added in the Drying Depurtment. Pulping cost represents the costs of…
A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…
Q: Boston Company uses the weighted-average method in its process-costing system. Operating data for…
A: Work in progress refers to such goods (or services) which are partially completed finished goods. It…
Q: Production information shows the following costs and units for the smoothing department in August.…
A: Work in process are the company’s partially finished goods which are yet to be completed. The…
Q: Hanson Corporation uses the weighted-average method in its process costing system. Data concerning…
A: In the above question we have asked to calculate equivalent units for material and conversion cost…
Q: NUBD Corporation uses the FIFO method in its process costing system. Operating data for the Casting…
A: The equivalent units are calculated on the basis of percentage of work completed during the period.
Q: Costs per Equivalent Unit and Production Costs The following information concerns production in the…
A: Question posted is having multiple sub-parts. So, first three sub-parts of question is answered.…
Q: During March, the following costs were charged to the manufacturing department: $15,480 for…
A: At the year end the organizations have various types of stock like finished goods, raw materials,…
Q: During March, the following costs were charged to the manufacturing department: $13,520 for…
A: Process costing is a method of costing which generally used in manufacturing where units are…
Q: o production in July; and there were 15,000 units that were 40% complete in the ending work in…
A: Equivalent units of Production: Equivalent units of production includes the completed units of…
Q: Kurtulus Corporation uses the weighted-average method in its process costing system. Data concerning…
A: First compute equivalent units and cost per equivalent unit as shown below:
Q: Use this information about the Assembly Department to answer the question that follows. The debits…
A: Process costing is a method of costing used in industries where the raw material passes through two…
Q: Line following information applies to the questions displayed below. Carlberg Company has two…
A: The equivalent units are calculated on the basis of percentage of the work completed during the…
Q: DEF Company has a process cost system. All materials are introduced at the beginning of the process…
A: The following computations are done for DEF Company.
Q: The following production data were taken from the records of the Finishing Department for June:…
A: Number of conversion equivalent units of production in the June 30 (FIFO method) = (Beginning…
Process Costing
Process costing is a sort of operation costing which is employed to determine the value of a product at each process or stage of producing process, applicable where goods produced from a series of continuous operations or procedure.
Job Costing
Job costing is adhesive costs of each and every job involved in the production processes. It is an accounting measure. It is a method which determines the cost of specific jobs, which are performed according to the consumer’s specifications. Job costing is possible only in businesses where the production is done as per the customer’s requirement. For example, some customers order to manufacture furniture as per their needs.
ABC Costing
Cost Accounting is a form of managerial accounting that helps the company in assessing the total variable cost so as to compute the cost of production. Cost accounting is generally used by the management so as to ensure better decision-making. In comparison to financial accounting, cost accounting has to follow a set standard ad can be used flexibly by the management as per their needs. The types of Cost Accounting include – Lean Accounting, Standard Costing, Marginal Costing and Activity Based Costing.
Trending now
This is a popular solution!
Step by step
Solved in 4 steps with 6 images
- Scribners Corporation produces fine papers in three production departments—Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Units Pulping Conversion Work in process inventory, March 1 3,500 100 % 80 % Work in process inventory, March 31 7,500 100 % 60 % Pulping cost in work in process inventory, March 1 $ 1,085 Conversion cost in work in process inventory, March 1 $ 350 Units transferred to the…Scribners Corporation produces fine papers in three production departments—Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, thedried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: No materials are added in the Drying Department. Pulping cost represents the costs of the wet fibers transferred in from the Pulping Department. Wet fiber is processed in the Drying Department in batches; each unit in the above table is a batch and one batch of wet fibers produces a setamount of dried paper that is passed on to the…Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Units Pulping Conversion 20% Work in process inventory, March 1 Work in process inventory, March 31 5,000 100% 8,000 100% 25% $4,800 $500 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during…
- Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Work in process inventory, March 1 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Units Percent Completed Pulping Conversion…Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Work in process inventory, March 1 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Complete this question by entering your…Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted average method in its process costing system. Data for March for the Drying Department follow. Work in process inventory, March 11 Work in process inventory, March 31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion cost added during March Units 3,500 7,500 Percent Completed…
- Scribners Corporation produces fine papers in three production departments-Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Pulping 100% Conversion 80% Units 2,700 7,500 Work in process inventory, March 1 Work in process inventory, March-31 Pulping cost in work in process inventory, March 1 Conversion cost in work in process inventory, March 1 Units transferred to the next production department Pulping cost added during March Conversion…Please help explain these steps to me. I'm not coming up with answers that are correct. Scribners Corporation produces fine papers in three production departments—Pulping, Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to separate their fibers. The result is a thick slurry of fibers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: Percent Completed Units Pulping Conversion Work in process inventory, March 1 2,500 100 % 80 % Work in process inventory, March 31 7,600 100 % 75 % Pulping cost in work in process inventory, March 1 $ 1,050…Reducir, Inc., produces two different types of hydraulic cylinders. Reducir produces a major subassembly for the cylinders in the Cutting and Welding Department. Other parts and the subassembly are then assembled in the Assembly Department. The activities, expected costs, and drivers associated with these two manufacturing processes are given below. Note: In the assembly process, the materials-handling activity is a function of product characteristics rather than batch activity. Other overhead activities, their costs, and drivers are listed below. Other production information concerning the two hydraulic cylinders is also provided: Required: 1. Using a plantwide rate based on machine hours, calculate the total overhead cost assigned to each product and the unit overhead cost. 2. Using activity rates, calculate the total overhead cost assigned to each product and the unit overhead cost. Comment on the accuracy of the plantwide rate. 3. Calculate the global consumption ratios. 4. Calculate the consumption ratios for welding and materials handling (Assembly) and show that two drivers, welding hours and number of parts, can be used to achieve the same ABC product costs calculated in Requirement 2. Explain the value of this simplification. 5. Calculate the consumption ratios for inspection and engineering, and show that the drivers for these two activities also duplicate the ABC product costs calculated in Requirement 2.
- Benson Pharmaceuticals uses a process-costing system to compute the unit costs of the over-the-counter cold remedies that it produces. It has three departments: mixing, encapsulating, and bottling. In mixing, the ingredients for the cold capsules are measured, sifted, and blended (with materials assumed to be uniformly added throughout the process). The mix is transferred out in gallon containers. The encapsulating department takes the powdered mix and places it in capsules (which are necessarily added at the beginning of the process). One gallon of powdered mix converts into 1,500 capsules. After the capsules are filled and polished, they are transferred to bottling, where they are placed in bottles that are then affixed with a safety seal, lid, and label. Each bottle receives 50 capsules. During March, the following results are available for the first two departments: Overhead in both departments is applied as a percentage of direct labor costs. In the mixing department, overhead is 200% of direct labor. In the encapsulating department, the overhead rate is 150% of direct labor. Required: 1. Prepare a production report for the mixing department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to two decimal places for the unit cost.) 2. Prepare a production report for the encapsulating department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to four decimal places for the unit cost.) 3. CONCEPTUAL CONNECTION Explain why the weighted average method is easier to use than FIFO. Explain when weighted average will give about the same results as FIFO.Lacy, Inc., produces a subassembly used in the production of hydraulic cylinders. The subassemblies are produced in three departments: Plate Cutting, Rod Cutting, and Welding. Materials are added at the beginning of the process. Overhead is applied using the following drivers and activity rates: Other data for the Plate Cutting Department are as follows: Required: 1. Prepare a physical flow schedule. 2. Calculate equivalent units of production for: a. Direct materials b. Conversion costs 3. Calculate unit costs for: a. Direct materials b. Conversion costs c. Total manufacturing 4. Provide the following information: a. The total cost of units transferred out b. The journal entry for transferring costs from Plate Cutting to Welding c. The cost assigned to units in ending inventoryGolding Manufacturing, a division of Farnsworth Sporting Inc., produces two different models of bows and eight models of knives. The bow-manufacturing process involves the production of two major subassemblies: the limbs and the handles. The limbs pass through four sequential processes before reaching final assembly: layup, molding, fabricating, and finishing. In the layup department, limbs are created by laminating layers of wood. In the molding department, the limbs are heat-treated, under pressure, to form strong resilient limbs. In the fabricating department, any protruding glue or other processing residue is removed. Finally, in the finishing department, the limbs are cleaned with acetone, dried, and sprayed with the final finishes. The handles pass through two processes before reaching final assembly: pattern and finishing. In the pattern department, blocks of wood are fed into a machine that is set to shape the handles. Different patterns are possible, depending on the machines setting. After coming out of the machine, the handles are cleaned and smoothed. They then pass to the finishing department, where they are sprayed with the final finishes. In final assembly, the limbs and handles are assembled into different models using purchased parts such as pulley assemblies, weight-adjustment bolts, side plates, and string. Golding, since its inception, has been using process costing to assign product costs. A predetermined overhead rate is used based on direct labor dollars (80% of direct labor dollars). Recently, Golding has hired a new controller, Karen Jenkins. After reviewing the product-costing procedures, Karen requested a meeting with the divisional manager, Aaron Suhr. The following is a transcript of their conversation: Karen: Aaron, I have some concerns about our cost accounting system. We make two different models of bows and are treating them as if they were the same product. Now I know that the only real difference between the models is the handle. The processing of the handles is the same, but the handles differ significantly in the amount and quality of wood used. Our current costing does not reflect this difference in material input. Aaron: Your predecessor is responsible. He believed that tracking the difference in material cost wasnt worth the effort. He simply didnt believe that it would make much difference in the unit cost of either model. Karen: Well, he may have been right, but I have my doubts. If there is a significant difference, it could affect our views of which model is more important to the company. The additional bookkeeping isnt very stringent. All we have to worry about is the pattern department. The other departments fit what I view as a process-costing pattern. Aaron: Why dont you look into it? If there is a significant difference, go ahead and adjust the costing system. After the meeting, Karen decided to collect cost data on the two models: the Deluxe model and the Econo model. She decided to track the costs for one week. At the end of the week, she had collected the following data from the pattern department: a. There were a total of 2,500 bows completed: 1,000 Deluxe models and 1,500 Econo models. b. There was no BWIP; however, there were 300 units in EWIP: 200 Deluxe and 100 Econo models. Both models were 80% complete with respect to conversion costs and 100% complete with respect to materials. c. The pattern department experienced the following costs: d. On an experimental basis, the requisition forms for materials were modified to identify the dollar value of the materials used by the Econo and Deluxe models: Required: 1. Compute the unit cost for the handles produced by the pattern department, assuming that process costing is totally appropriate. Round unit cost to two decimal places. 2. Compute the unit cost of each handle, using the separate cost information provided on materials. Round unit cost to two decimal places. 3. Compare the unit costs computed in Requirements 1 and 2. Is Karen justified in her belief that a pure process-costing relationship is not appropriate? Describe the costing system that you would recommend. 4. In the past, the marketing manager has requested more money for advertising the Econo line. Aaron has repeatedly refused to grant any increase in this products advertising budget because its per-unit profit (selling price minus manufacturing cost) is so low. Given the results in Requirements 1 through 3, was Aaron justified in his position?