Example Air conditioning unit uses Freon R-22 for conditioned office at 25 C. The evaporating temperature is 17 C and the condensing temperature is 47 C. The compressor is reciprocating and-single acting with number of cylinders of 4, volumetric efficiency of 0.9, number of revolution is 900 rpm cylinder dimensions of L/D is 1.25. If the compressor power is 3 kW and mechanical efficiency of 0.9, estimate the followings: the refrigerant mass flow rate in kg/min, refrigeration capacity in TR, cylinder dimensions, condenser heat load, coefficient of performance and relative efficiency. and

Example Air conditioning unit uses Freon R-22 for conditioned office at 25 C. The evaporating temperature is 17 C and the condensing temperature is 47 C. The compressor is reciprocating and-single acting with number of cylinders of 4, volumetric efficiency of 0.9, number of revolution is 900 rpm cylinder dimensions of L/D is 1.25. If the compressor power is 3 kW and mechanical efficiency of 0.9, estimate the followings: the refrigerant mass flow rate in kg/min, refrigeration capacity in TR, cylinder dimensions, condenser heat load, coefficient of performance and relative efficiency. and

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 8RQ: Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______,...

See similar textbooks

Similar questions

Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______, and
An engine operating on the air standard heat engine has 13 KJ heat added at isochoric process, heat ratio of air = 1.35. If the minimum pressure and temperature are 101 KPa and 305 K, respectively. The maximum volume of 3.8x 10 -2 m3 with clearance of 10%. Determine: The work of cycle in KJ The mep in MPa
9. A 9.5 tonnes capacity of ammonia refrigerator operates between evaporator and condenser temperature of -13°C and 28°C is needed in a food storage locker. The refrigerant is sub-cooled by 4°C before entering the expansion valve. The vapour is 0.90 dry as it leaves the evaporator coil. The compression in the compressor is adiabatic type. Using p-h chart find (i) Condition of vapour at outlet of the compressor (ii) Condition of vapour at entrance to evaporator (iii) С.О.Р. (iv) Power required in kW Neglect valve throttling and clearance effect.
A two-stage R-22 system uses flash-gas remoal and intercooling as in the previous problem. The evaporating temperature is -40 C and the condensing temperature is 30 C. The pumping capacity of the high and low stage compressors is shown below: (from picture solve a and b)
The condensing pressure for a Rankine engine is 0.001325 MPavac. Calculate the following for steam flow rate = 1 kg/sec of steam when the steam at the beginning of expansion is at 119.6 deg SH and 4.0 Mpaa. Draw the TS and equipment diagrams for the ideal and actual case and find for the following for the ideal case: Pump work in KW. Ans. Ideal heat rate in KJ/KW-hr. Ans. Rankine engine efficiency (%). Ans. Cycle thermal efficiency ( %). Ans
Homework-2 Compute the themal e fficiency of an ideal Ran kine cycle for which the steam leavea the boiler as Saturated Vapor at 30 bars. The turbine-outlet Conditions is Be1 bar. Determine the mass floo rate of the steam in kg/hr, net Power output of the cycle is 50000 Sehematic ond given data are: 1f the kw. The TI= 5002 P 3०bars %3D 9in (saturated) vapour 30 bars 2 PR =0-1 bar 4 Pa=30 bas o-1 bar +4 Tout 3 (Saturated liquid) Wp ( Simple Ideal Power cycle) (T.S. diagram e)
A compressor must operate in a speed range between 0 and 1500 rpm. The friction torque of Coulomb Tc is 10 N. m. What should be the required Tw working torque if the compressor constant is 0.5 N. m. s. What is the power required by the engine that operates this compressor?
What should be the percent increase of COPof a standard vapor compression refrigerationsystem when expansion of R-12 is isentropicinstead of isenthalpic process? Evaporator andcondenser temperature limits are -10°C and30°C respectively.
An air conditioning supply fan is operating at and requiring 4.85kW. 600 RPM against is delivering 540m / min at 500PA SP It standard conditions. In order to handle air conditioning load, heavier than originally planned, more air is desired, in order speed SP and to increase flow are the new power?
1) A singe acting, twin cylinder, ammonia compressor with bore equal to stroke is driven by an engine at 250 rpm. The machine is installed in a chilling plant to generate 700 kW of refrigeration at -18C evaporating temperature. At this temperature, the cooling effect per kg mass is 1160 kJ. The sp volume of vapor entering the compressor is 0.592 m³/kg. Assume 85% volumetric efficiency. Calculate the bore in mm.
QI/ Refrigeration unit using R-134a as shown in figure below contains two compressors and two evaporators . the first evaporator is used for getting low temperature operate with temperature of (-20C) and 20 ton refrigeration capacity, the second evaporator is use for cooling air purpose operate with temperature of (10°C) and 10 ton. condensing temperature is (40°C), calculate 1. Power required 2. C.O.P Condenser Evaporator - II Compressor II Quu Compressor - I Evaporator - I W. Qu
Specify The C.O.P. of the cycle refrigeration vapor compression a simple R-717. Temperature evaporation is -20 °C and the temperature of the condenser is 30 °C (C.O.P is found using enthalpy)