A simple support beam with a span of lo=4m, the standard value of linear uniformly distributed permanent load on the is qGk=8kN/m, and the standard value of the variable uniformly distributed load is qqk=6kN/m, the standard value of the concentrated variable load in midspan is P₁=10kN, no wind load to participate in the combination. The beam is an important building component with a safety level of one grade and a design life of 50 years. Calculate the design value of bending moment in midspan!

A simple support beam with a span of lo=4m, the standard value of linear uniformly distributed permanent load on the is qGk=8kN/m, and the standard value of the variable uniformly distributed load is qqk=6kN/m, the standard value of the concentrated variable load in midspan is P₁=10kN, no wind load to participate in the combination. The beam is an important building component with a safety level of one grade and a design life of 50 years. Calculate the design value of bending moment in midspan!

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.2.1P: A W1422 acts compositely with a 4-inch-thick floor slab whose effective width b is 90 inches. The...

See similar textbooks

Similar questions

ス F. reinforced concete structure is shown The floor framing plan oF in the figure. The beams are 280 mm wide and S20 mm deep, and the slob is 110mm thick an edditional (super impes) veight,1 and live lo ad of OTher than conerete weight, the floor subjected other to Is dead load of 3k Pa si2 k Por. Unit weight of concrete is 23.5 kN/m® le Determine the total uniform load on beam DEF and ABC axial load 20 Determme the total on columns A and B,D an) E 2Sm 티 2.Sm 6.2m 6.2m
Design economical spacing of 10 mm diameter stirrups for the beam which carries the loads shown. Design shear reinforcement of prestressed beam with the following properties listed. Properties: f^c=28 MPa fy = 276MPa Aps = 800 mm² Ds = 10mm Dm = 18mm fse = 800 MPa fpu = 1500 MPa fpe = 860 MPa Pe = 250kN
Design an interior span slab of a concrete floor system with the following description:  Span = 30 m Imposed dead load= 900 N/m2 Live load= 4900 N/m2 fc’= 28 MPa fy = 415 MPa Note :- Solve by ACI method
3.(a) A simply supported T-beam of span 9 m in reinforced concrete has the following dimensions: Flange width = 2000 mm Flange thickness = 150 mm Overall depth = 750 mm Rib width = 300 mm The beam is provided with 6 No. 32 mm diameter HYSD bars of grade Fe 500. Concrete used is of grade M 25: Find the moment of resistance of the beam using limit state method. Also find the magnitude of two point loads at 3 m distance from the ends. [Assume effective cover = 70 mm]
A decorative concrete beam shown is simply supported on a span of 5m. f'c = 21 MPa Unit weight of concrete = 23.5 KN/m³ fr = 3 MPa RSB = 3-28mmo fy = 414 MPa concrete cover = 70mm In addition to its weight, what is the safe maximum uniform live load the beam could support. 100 mm 600 mm As 300 mm
3) Calculations Steel Structure Corridor Dead Load = (uniform load) Live Load = 80 psf (uniform load) Find Ac 15
O O O"lZAIN IQ docs.google.com/forms O 55 MPa التحديد bl 6 Determine the maximum BM occurs for the beam shown below 3 kN/m C 2m 4 m -24 kNm O -48 kNm -12 kNm - 96 kNm no one ద 13 FOR THE RIGID BEAM SHOWN BELOW FIND THE STRESS IN
in 21- ő A steel beam is reinforced by three steel rods. The modulous of elasticity for concrete is 20Gpa and for steel is 200Gpa. Maximum allowable stress for concrete is 9.45Mpa and for steel is 140Mpa. Calculate the largest allowable positive WBT bending moment in the beam. иа mo maod motinu od o boblow need sved Ha bus 400mm aidT (alonnerlo ert to rigiow stongi)/4000E of Trup 200-0 signs or botuesom sWnworla es berloss M bris V zsra erli owob stiW maod sdi to mergeib insm brol bus borlism tuo sallimill nollor 10 nige over on The modulus of elasticity for concrete is 20Gpa and for the steel is 200 Gpa. Allowable stress for concrete is 9Mpa and for steel is 140Mpa. Calculate the maxium allowable bending momemt that can be applied per metal rod of the concrete slab. 150mm 200mm D=16mm 140 mm -22mm Diameter TOPABA t 50mm T 140 mm 140 mm 140 mm
Example 2 (H.W) : For the simply supported beam of section shown in figure below, calculate the flexural stresses at ends and mid-span at all loading stages, then check these stresses with ACI limitations use fci' = 29 MPa, fc'= 35 MPa, Fpi= 1300 MPa, final losses =20 % live load= 5 kN/m, dead load =5 kN/m in addition to its own weight, span length= 13 m, class U and all live load is sustained. 600 mm 75 mm 700 mm 50 mm 100 mm 100 mm
RCDA reinforced concrete T- beam, section in Figure 2 (a), is subjected to an ultimate uniformload and concentrated loads as shown in the Figure 2(b). The beam is reinforced with 6-28 mm diameter tension bars at the point of maximum positive moment (at midspan -bars at the bottom), and 3-28 mm diameter tension bars at the point of maximum negativemoment (at the supports - bars at the top) .. The design properties used are: f ‘c = 21MPa and fy = 414 MPa, ; flange width = 650 mm, flange thickness is = 90 mm; webthickness = 250 mm; effective depth = 410 mm.Need to answerQ. Draw the shear and moment diagrams for the given loads;
Design to carry the load consisting of two crane wheels, 3.5m apart moving over a rectangular beam having a span of 8m. The weight of one wheel is 70kN and the other is 55kN. Allowable fiber stress is 13.70 MPa in bending and use d=2b.
Situation #2: A rectangular beam has the following properties: Width, b = 400 mm 415 MPa Effective depth, d = 620 mm 22 MPa Tension bars, 10 pcs 28-mm-diameter Compression bars, 3 pcs 25-mm-diamter d' = 70 mm fy= = fc' = Determine the design strength of the beam and the safe live load if the service dead load is 320 kN.m