6. Discuss the difference(s) between an actual and an ideal Rankine power cycle. Please select all answers that apply: a) For an actual cycle, the states are fixed and enthalpy change relations can be applied; b) Governing cycle equations are derived from mass and energy rate balances and they apply equally when irreversibilities are present or not for idealized performance. c) For an ideal cycle, frictional pressure drops are absent through the boiler and condenser as processes occur at constant pressure. d). For an ideal cycle, flow through the turbine and pump are adiabatic and without irreversibilities. e) Ideal process through the turbine and pump are considered isentropic.

6. Discuss the difference(s) between an actual and an ideal Rankine power cycle. Please select all answers that apply: a) For an actual cycle, the states are fixed and enthalpy change relations can be applied; b) Governing cycle equations are derived from mass and energy rate balances and they apply equally when irreversibilities are present or not for idealized performance. c) For an ideal cycle, frictional pressure drops are absent through the boiler and condenser as processes occur at constant pressure. d). For an ideal cycle, flow through the turbine and pump are adiabatic and without irreversibilities. e) Ideal process through the turbine and pump are considered isentropic.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

On the diagram below sketch a basic Rankine cycle with superheating. Assume that there are irrevesibilities in the turbine and pump. Identify the device associate with each process. Make sure to label: the states and include important features, e.g. lines of constant temperature, volume, pressure, entropy, vapor dome, etc.
3.1 Describe with the aid of a plant layout and p-v and T-s diagrams, the working of simple closed circuit, ideal and actual constant pressure gas turbine cycles.
An Otto cycle is to be used to model an engine cycle. All assumptions of the ideal Otto cycle are to be applied except a polytropic process with n = 1.3 will be used for the expansion process. The conditions at the beginning of compression are T: = 333 K, P1 = 90 kPa and the compression ratio is 8. The energy input into the cycle during the constant volume process is 2000 kJ/kg. Assume constant specific heats. %3D a) Find the temperature (K) and pressure (kPa) after compression b) Find the peak temperature of the cycle. (K) c) Find the temperature at the end of the expansion process. (K) d) Find the expansion work (kJ/kg) e) Find the net heat transfer for the cycle (kJ/kg)
1. You are required to perform an energy analysis of a Carnot Vapor Cycle and an ideal Rankine Cycle which operate on the same compression and expansion pressures. The analysis should include but not limited to: a. State diagrams of the cycles, and b. Sample calculations of the performance of the cycles in regard to thermal efficiency and work ratio with appropriate assumptions. Compare and comment on your findings.
19. In the Brayton cycle shown in the figure, pressure drop at the heat sink is neg- ligible hence, rc ± r. a) Draw the T-s diagram and explicitly show the differences between the pressure levels of states 1 and 3. b) Use the given data to find rc and rr, assuming the working fluid is an ideal gas. Reactor AP +0 Compressor Turbine T, = 704.4 C (1300 F) T = 1093.3 C (2000 F) Q=0.381kW me, = 0.66 W/K (1.25 Btu/h R) "= 0.9 AP =0 1=0.95 = 0.35 Noyele (7- 1)/y= 0.4 Cooling Tower
1. Consider an ideal Carnot Cycle with water as the working fluid using operating conditions shown. a. Complete the following chart with relevant state properties. Turbine Temperature (°C) Entropy (kJ/kg K) Pressure Boileri State Quality (bar) Cooling water Pump Condenser 1 50 1 4 0.50 0.50 4 50 Sketch the process on a T-s diagram, including the liquid-vapor dome. How much work per kg of flow does the turbine produce, in kJ/kg? How much total work per kg of flow does the entire cycle produce, in kJ/kg? b. c. d. What is the thermal efficiency of the cycle? How would you expect that thermal efficiency to change for a Rankine cycle operating similarly, but with state 3 a saturated liquid at the same pressure, and state 4 a compressed liquid at the same pressure? Would it increase, decrease, or stay the same? Explain. e. f. 2. 31
Q1. Sketch T-s diagram for Rankine cycle with clear label for the following condition: Condensate pressure = 100 kPa • Boiler pressure = 3 MPa • Inlet temperature to the turbine = 350°C Determine thermal efficiency of the cycle. ANSWER
i.Drawaschematic diagramof each problem with labels of states of a substance; ii.For uniformity purposes, assign STATE 1 at the inlet of ahigh-pressure turbine.The states must be arranged in a chronologicalorder; iii.Ploteach cycle in a t-s diagramwith the states consistentto the states assignment in the schematic diagram; iv.Show a detailed solution An ideal reheat Rankine cycle with water as the working fluid operates the boiler at 10MPa, the reheater at 2MPa, and the condenser at 0.1MPa. The temperature is 4500C at the entrance of the high-pressure and low-pressure turbines. The mass flow rate through the cycle is 1.74 kg/s. Determine a)the rate of heat transfer in the reheater, and b) thecyclethermal efficiency.
Q4//All The open cycle gas turbine using intercooling. regeneration and reheating arrangement with pressure ratio 49, compressor inlet temperature 27 C, turbine inlet temperature 1300 "C, compressor efficiency 0.86, turbine efficiency 0.87, regenerative effectiveness 0.8, combustion efficiency 0.99, mechanical efficiency of whole assembly 0.97, generator efficiency 0.98, inlet pressure to compressor Tbar. Determine:1- cycle work, 2- cycle thermal efficiency, 3- cycle work ratio. [9 B// What are the general classification of boilers that used in steam power plants?
Fill in the blank: The compression in the Otto cycle involves an isentropic process in a closed piston-cylinder assembly, whereas the compression in the ideal Brayton cycle involves an isentropic process in a(n) (Type your answer here) operating at steady state.
In the ideal Rankine cycle, the constant pressure heat addition occurs in a condenser pump O boiler turbine In an ideal gas mixture, the molar mass is equal to the ratio of universal gas constant to the gas constant. Select one: O True O False The multi-stage compression as compared to single-stage compression reduces work done per kg of air Select one: O True O False The compressibility factor (Z) for ideal gas is equal to one and for real gases can be greater or less than one. Select one: O True O False
A medium size power station is used to produce 30 MW net power for arefinery. The station uses steam as the operating fluid and operatesaccording to the Carnot cycle between the pressure limits of 0.4 bar and35 bar. Steam enters the boiler as a saturated liquid and leaves it as adry saturated vapour. (i) List the name of the four processes in a generic Carnot cycle andstate what type of energy transfer (work/heat) can be neglectedin each process. (ii) Determine the dryness fraction of the steam that is fed to thecondenser, and the specific enthalpy values at the four key points ofthe cycle. (iii) Calculate the specific heat provided to the boiler, the specificwork extracted from the power station and the mass flow rate ofthe steam circulating in the cycle, then, determine the thermal efficiency of the cycle.