1.7.3 Axle load study conducted on a stretch of road in 2017 yield'these results: Axle load range (ton) 2 - 4 4 - 6 6-8 8 - 10 10 - 12 12 - 14 No. of axle 500 710 599 21 452 168 Number of commercial vehicles for the particular day is 1860. Based on Road Note 31, determine: a) Average number of axle per commercial vehicle; b) Total equivalent standard axle for that particular day;

1.7.3 Axle load study conducted on a stretch of road in 2017 yield'these results: Axle load range (ton) 2 - 4 4 - 6 6-8 8 - 10 10 - 12 12 - 14 No. of axle 500 710 599 21 452 168 Number of commercial vehicles for the particular day is 1860. Based on Road Note 31, determine: a) Average number of axle per commercial vehicle; b) Total equivalent standard axle for that particular day;

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Situation: A proposed four-lane divided highway is to be constructed using asphalt concrete surface layer. Table below shows the fvevRAr traffic data collected from DPWH regional office along the proposed alignment. Load per axle, Ibs 2,000 10,000 14,000 6,000 Vehicle Number of Description AADT Code axles В, В1, В2 12-2 12-3 Light Vehicles (sedan, SUV, pickup) Semi-trailer trucks Truck semi-trailer Public buses, single-unit trucks 75,000 4,000 1,500 15,700 5 D-4 2 Forecasted annual traffic growth Percentage of traffic on design lane Design service life of pavement = 4.Y% = 32% = 20 years Moreover, the regional office plans to adapt a flexible pavement with the following specifications listed below. Resilient modulus of asphalt concrete Resilient modulus of base course Resilient modulus of subbase course = 420 ksi California Bearing Ratio (CBR) of base course material California Bearing Ratio (CBR) of subbase material California Bearing Ratio (CBR) of subgrade material - 28.5 ksi = 15…
Q: Given the data below: Daily Traffic Count Axle Load (Kips) (2-axle) (3-axle) 22 (4-axle) 40 (5-аxle) 50 (б-аxle) 50 SN is 5, P,34.2, Р,%33, design life is 15 years, growth rate is 2.5%, lane distribution factor = 0.45, AADT = 1600 Calculate the ESAT. 2.
A road has the following traffic axle distribution Traffic Axle Distribution Axle Group Type Total Axle Group SAST 512 Answer: SADT TAST TADT 743 275 511 determine the average number of axle groups per heavy vehicle. Please provide your answer to three decimal points TROT 549
Question 4 a) The axle load data collected on a section of a highway for a short duration for 2 and 3 - axle trucks are presented in Table 1. Determine the ESAL per axle, total ESAL per truck and the truck factors for 2 and 3-axle trucks. Table 1: Axle load data Vehicle питber No. of axles Axle Weight (tons) Axle 3 Axle 4 Axle 5 Date Сommodity Axle 1 Axle 2 15-Jul-10 GR 6687 -10 16-Jul-10 GW 4925 S 15-Jul-10 AS 4602 Z 15-Jul-10 BA 4772 C 16-Jul-10 GR 2706 09 15-Jul-10 GR 9626 E 16-Jul-10 WR 9290 C 15-Jul-10 AS 6865 Q charcoal 3 4.00 10.20 5.20 13.60 16.80 cement 5.50 lumber 10.20 4.00 14.60 charcoal charcoal charcoal 2 6.10 4.20 14.20 8.50 19.80 13.20 charcoal 5.10 13.70 charcoal 8.40 14.90 6.10
A traffic survey conducted on a road yields an average daily traffic count of 5000 vehicles. The axle Load distribution on the same road is given. in the following table: Axle Load (tonnes) 18 14 10 8 6 Frequency of traffic (%) 10 20 35 15 20 The design period of the road is 15 years, the yearly traffic growth rate is 7.5% and the load safety factor (LSF) is 1.3. If the vehicle damage factor (VDF) is calculated from the above data, the design traffic (in million standard axle Load, MSA) is
A traffic surveying conducted on a road yield an average daily traffic count of 5000 vehicle. The axle load distribution on the same road is given in the following table. Axle load (tones) Frequency of traffic (f) 18 10 14 20 10 35 8 15 6 20 ... The design period of the road is 15 years. The yearly Traffic growth rate is 7.5% the load safety factor (LSF) is 1.3. If the vehicle damage factor (VDF) is calculated from the above data, the design traffic (In million standard axle load MSA) is
Given the data below: Daily Traffic Count Axle Load (Kips) 1000 (single axle cars) 300 (single axle buses) 120 (tandem axle trucks) 100 (tandem axle trucks) 50 (triple axle trucks) 22 40 50 50 SN is 5, P = 4.2, P; = 3, design life is 20 years, growth rate is 5%, lane distribution factor = 0.45 EASL Calculate the !
A. Given Design years for 2 direction of road Number of lanes. 2 lanes ADT - 3500 Calculate the ESAL for one direction of road 20 years Wheel Load (kN) Equivalent Load Factors % in total traffic volume 45 0.03 25 20 0.044 16 150 15 8 80 2.5 25 165 25 21 285 42 2.
Given the data below: Daily Traffic Count Axle Load (Kips) 1000 (single axle cars) 300 (single axle buses) 120 (tandem axle trucks) SN is 5, Pi = 4.2, 22 40 Pr = 3, design life is 20 years, growth rate is 5%, lane distribution factor = 0.45 %3D Calculate the ESAL.
The predicted traffic mix of a proposed four-lane urban non-interstate freeway is as follows. Passenger cars = 78% Single-unit trucks: 2-axle, 5,000 lb/axle = 12% 2-axle, 9,000 lb/axle = 4% 3-axle or more, 23,000 lb/axle = 3% Tractor semitrailers and combinations: 3-axle, 20,000 lb/axle = 3% The projected AADT during the first year of operation is 3,900 (both directions). If the traffic growth rate is estimated at 3 percent and the CBR of the subgrade is 7.5, determine the depth of a full- asphalt pavement (in inches) using the AASHTO method and n = 20 years. The resilient modulus of the asphalt (EAC) is 320,000 lb/in². Assume m, for the subgrade is 1 and the percent of traffic on the design lane is 42 percent, p₁ = 2.5, and SN = 4. Use a reliability level of 90 percent, a standard deviation of 0.45, and a design serviceability loss of 2.0. Assume the design lane factor f is 0.42. (Use single-axle load equivalency factors for 2-axle vehicles and tandem-axle load equivalency factors for…
The predicted traffic mix of a proposed four-lane urban non-interstate freeway is as follows. Passenger cars = 78% Single-unit trucks: 2-axle, 5,000 lb/axle = 12% 2-axle, 9,000 lb/axle = 4% 3-axle or more, 23,000 lb/axle = 3% Tractor semitrailers and combinations: 3-axle, 20,000 lb/axle = 3% The projected AADT during the first year of operation is 3,900 (both directions). If the traffic growth rate is estimated at 3 percent and the CBR of the subgrade is 7.5, determine the depth of a full-asphalt pavement (in inches) using the AASHTO method and n = 20 years. The resilient modulus of the asphalt (EAC) is 320,000 lb/in². Assume m, for the subgrade is 1 and the percent of traffic on the design lane is 42 percent, pt = 2.5, and SN = 4. Use a reliability level of 90 percent, a standard deviation of 0.45, and a design serviceability loss of 2.0. Assume the design lane factor f is 0.42. (Use single-axle load equivalency factors for 2-axle vehicles and tandem-axle load equivalency factors for…
The predicted traffic mix of a proposed four-lane urban non-interstate freeway is as follows. Passenger cars = 78% Single-unit trucks: 2-axle, 5,000 lb/axle = 12% 2-axle, 9,000 lb/axle = 4% 3-axle or more, 23,000 lb/axle = 3% Tractor semitrailers and combinations: 3-axle, 20,000 lb/axle = 3% The projected AADT during the first year of operation is 3,900 (both directions). If the traffic growth rate is estimated at 3 percent and the CBR of the subgrade is 7.5, determine the depth of a full-asphalt pavement (in inches) using the AASHTO method and n = 20 years. The resilient modulus of the asphalt (EAC) is 320,000 lb/in2. Assume mi for the subgrade is 1 and the percent of traffic on the design lane is 42 percent, pt = 2.5, and SN = 4. Use a reliability level of 90 percent, a standard deviation of 0.45, and a design serviceability loss of 2.0. Assume the design lane factor fd is 0.42. (Use single-axle load equivalency factors for 2-axle vehicles and tandem-axle load equivalency…