Concept explainers
What are the major properties required of cutting-tool materials? Why?
What are the major properties required of cutting-tool materials? Why?
Explanation of Solution
A cutting-tool material should have the below attributes:-
Hot hardness
Wear resistance coupled with hardness and strength of the tool stay intact at the temperatures experienced in machining operations. This property is responsible for making sure that the tool would not go through any plastic deformation. That is how it retains its sharpness and forms both.
Toughness and strength of impact
In interfered cutting tasks or forces like milling, and then turning a splined shaft on a lathe, the forces of impact on the tools is experienced time and again. This is because of vibration and chatter amid machining. But this neither chip nor break the tool.
Thermal shock resistance
To bear the fast temperature cycling, as experienced in interfered cutting.
Wear resistance
With the goal that a long-enough tool life is acquired before substituting becomes inevitable.
Chemical stability and inactiveness
Concerning the workpiece material, to evade or limit any unfavorable reactions, adhesion, and tool–chip diffusion which may fasten the wear of the tool.
Want to see more full solutions like this?
Chapter 22 Solutions
Manufacturing Engineering & Technology
Additional Engineering Textbook Solutions
INTERNATIONAL EDITION---Engineering Mechanics: Statics, 14th edition (SI unit)
Thermodynamics: An Engineering Approach
Fluid Mechanics: Fundamentals and Applications
Vector Mechanics For Engineers
Fluid Mechanics Fundamentals And Applications
Applied Fluid Mechanics (7th Edition)
- The shear strength of a certain work material 110000 lb/in?. An orthogonal cutting operation is performed using a tool with a rake angle is equal -12° and chip thickness before the cut is 0.026 in, width of cut is 0.120 in, also the chip thickness after cut is 0.082 in. Determine: (a) the shear plane angle, (b) the shear force, (c) cutting force, (d) thrust force, and (e) friction force.arrow_forwardDiscuss the effects of cutting speed, feed rate, and depth of cut on the tool wear rate during a turning operation. How does each parameter influence the surface finish of the workpiece? Provide a detailed explanation based on the principles of metal cutting mechanics.arrow_forward8 - Orthogonal cutting is performed on a metal whose mass specific heat = 1.0 J/g-C, density 2.9 g/cm3, and thermal diffusivity = 0.8 cm2/s. The cutting speed is 4.5 m/s, uncut chip thickness (feed) is 0.25 mm, and width of cut (depth) is 2.2 mm. The cutting force is measured at 1170 N. Using Cook's equation, determine the cutting temperature. a) 417.09 b) O 707.60 C) 528.03 d) O 316.82 Boş bırakarrow_forward
- (b) A 400 mm long, 19.5 mm diameter of 304 stainless steel rod (assume specific energy of steel is 4 W.s/mm³) is being reduced in diameter to 17 mm by turning on a lathe machine. The spindle rotates at N = 700 rpm, and the tool is traveling at an axial speed of 300 mm/min. Calculate: (i) (ii) (iii) (iv) (v) cutting speed material removal rate cutting time power dissipated cutting forcearrow_forward(a) Research the cutting tool alternatives which could be used for such operation. What are the parameters that could be optimized in the geometry of the cutting tool (The seven elements of tool geometry for a single point cutting tool)? What are some of the tool life criteria used in production machining operations? (b) In a turning operation on stainless steel with hardness = 200 HB, the cutting speed = 250 m/min, feed = 0.3 mm/rev, and depth of cut = 8 mm. How much power will the lathe draw in performing this of 7 operation if it's mechanical efficiency = 95%. Use Table below to obtain the annropriate specific enerey valuearrow_forwardWhat are the functions of cutting fluid?arrow_forward
- Identify the forces involved in a cutting operation. which of these forces contributes to the power required?arrow_forward(b) During a certain machining experiment at the UCSI workshop, it is observed that temperature at the tool workpiece interface is 1200 °C at a cutting speed of 300 mm/min with a feed rate of 0.002 mm/rev. (1) Analyse how the temperature will be affected if the cutting speed is increased by 100 %. (ii) Detemine the cutting speed necessary to achieve a maximum cutting temperature of 900 °C.arrow_forward3) Explain the advantages and any disadvantages of indexable cutting inserts. Why were they developed? 4) How does the coefficient of friction affect the relationship between the friction force and the normal force on the tool face? 5) A turning operation is being carried out on a long, round bar at a constant depth of cut. Explain what differences, if any, there may be in the machined diameter from one end of the bar to the other. Give reasons for any changes that may occur.arrow_forward
- (b) An orthogonal cutting operation is being carried out under the following conditions: depth of cut, to = 0.1 mm, chip thickness, to = 0.2 mm, width of cut = 4 mm, cutting speed, v = 3 m/s, rake angle, a = 10°, Cutting force, Fc = 500 N, and Thrust force, F1= 200 N. Calculate the percentage of the total energy that is dissipated in the shear plane of cutting process.arrow_forwardIn addition to cutting speed, what other cutting variables are included in the expanded version of the Taylor tool life equation?arrow_forwardQuestion 2. The two sources of heat are (a) shearing in the primary shear plane and (b) friction at the tool-chip interface. What type of the tool wear or tool failure could be caused as a result of developing these heat sources on machining process? Explain your answer in accordance with following representation of tool wear. Insert cutting edgearrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY