Contemplate a setup involving a pair of toy mine cars(assumed to have no friction) joined by two springs. One ofthese springs is fastened to a wall, as depicted in the diagram.Let's denote the displacements of the first and second massesfrom their balanced points as "x," and "x₂," respectively. Giventhat the masses are M₁ = 8 kg and M, = 4 kg, and the springconstants are k, = 256 N/m and k₁₂ = 128 N/m,12MiDETERMINE THE SYSTEM OF SECOND ORDERDIFFERENTIAL EQUATIONS FOR THE SYSTEM OF MINECARSAND THEN FIND THE GENERAL SOLUTION TO THIS SYSTEMOF DIFFERENTIAL EQUATIONS USING A,,A2,B1,B2 to denoteany arbitrary constants.x₁ (t) =LummKzSecond order differential equation:"X"=3General solution:X₂ (t)=

Given Data:A mechanical linear displacement system with,Displacements Masses Spring constants To…

Contemplate a setup involving a pair of toy mine cars (assumed to have no friction) joined by two springs. One of these springs is fastened to a wall, as depicted in the diagram. Let's denote the displacements of the first and second masses from their balanced points as "x," and "x₂," respectively. Given that the masses are M₁ = 8 kg and M₂ = 4 kg, and the spring constants are k, = 256 N/m and k₂ = 128 N/m, 1 2 Lumm mi monito K2 DETERMINE THE SYSTEM OF SECOND ORDER DIFFERENTIAL EQUATIONS FOR THE SYSTEM OF MINECARS AND THEN FIND THE GENERAL SOLUTION TO THIS SYSTEM OF DIFFERENTIAL EQUATIONS USING A,,A2,B1,B2 to denote any arbitrary constants. General solution: x, (t) = X₂ (t)= Lum Second order differential equation: *==

Contemplate a setup involving a pair of toy mine cars (assumed to have no friction) joined by two springs. One of these springs is fastened to a wall, as depicted in the diagram. Let's denote the displacements of the first and second masses from their balanced points as "x," and "x₂," respectively. Given that the masses are M₁ = 8 kg and M₂ = 4 kg, and the spring constants are k, = 256 N/m and k₂ = 128 N/m, 1 2 Lumm mi monito K2 DETERMINE THE SYSTEM OF SECOND ORDER DIFFERENTIAL EQUATIONS FOR THE SYSTEM OF MINECARS AND THEN FIND THE GENERAL SOLUTION TO THIS SYSTEM OF DIFFERENTIAL EQUATIONS USING A,,A2,B1,B2 to denote any arbitrary constants. General solution: x, (t) = X₂ (t)= Lum Second order differential equation: *==

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 1PA: You are working as an electrician in a large steel manufacturing plant, and you are in the process...

See similar textbooks

Similar questions

What are interpoles, and what is their purpose?
. To stretch a spring 3.00 cm from its unstretched length, 12.0 J of work must be done. (a) What is the force constant of this spring? (b) What magnitude force is needed to stretch the spring 3.00 cm from its unstretched length? (c) How much work must be done to compress this spring 4.00 cm from its unstretched length, and what force is needed to compress it this distance?
A solenoid is 40 cm long, has a cross sectional area of 8 cm2 and is wound with 300 turns of wire that carry a current of 1.2 A. The relative permeability of its core is 600. Find the flux through solenoid.
A solenoid similar to the figure below, has a core made of cast steel (refer to the figure on the next slide). It has a cross-sectional area of 4cm2 and a mean length of 20cm. The coil has 100turns, and the coil current is 3.2A. Find the following: d)Permeability, μ e) the relative permeability, μr f) the core reluctance, R and g) the flux, Ø
In the figure below, the rolling axle, 2.90 m long, is pushed along horizontal rails at a constant speed v = 12.00 m/s. A resistor R = 0.4000 N is connected to the rails at points a and b, directly opposite each other. The wheels make good electrical contact with the rails, so the axle, rails, and R form a closed-loop circuit. The only significant resistance in the circuit is R. A uniform magnetic field B = 0.0300 T is vertically downward. B b. (a) Find the induced current I in the resistor. A (b) What horizontal force F is required to keep the axle rolling at constant speed? N (c) Which end of the resistor, a or b, is at the higher electric potential? O Point a is at a higher potential. Point b is at a higher potential. O Point a and point b are at equal potentials. (d) After the axle rolls past the resistor, does the current in R reverse direction? O Yes No
3.12 A carbon brush used to conduct current from the commutator of a DC generator has a length of 4 in. It must conduct a current of 400 A with a voltage drop not exceeding 2 V. Determine the cross-sectional area of this carbon brush. 3.13 Early DC machines use brass brushes instead of carbon brushes. The com- mutator bars do not last very long since brass is a rather hard metal. If a brass brush of the dimensions determined in problem 3.12 is used instead to conduct the same current, determine the voltage drop.
A solenoid similar to the figure below, has a core made of caststeel (refer to the figure on the next slide). It has a cross-sectional area of 4cm2 and a mean length of 20cm. The coil has 100turns, and the coil current is 3.2A. Find the following:a)magnetomotive force, mmfb)magnetic field intensity, Hc)flux density, B (with graph)
Question: can you help me pls Assuming the magnetic permeability of the core as infinite in the magnetic circuit given in the figure, find each self- inductance and common inductance in terms of A1, A2, g1 and g2. 92 N2 iz the area of the shaded area A1, the area of the other areas A2
A solenoid similar to the figure below, has a core made of cast steel (refer to the figure on the next slide). It has a cross-sectional area of 4cm2 and a mean length of 20cm. The coil has 100turns, and the coil current is 3.2A. Find the following: a)magnetomotive force, mmf b)magnetic field intensity, H c)flux density, B
A square bar of 1 cm dimension and 30 cm long formed into a ring leaving an air gap at both ends of 1 cm length. The relative permeability of steel is 2000. A 1000 turns coil is wound in the ring and 3 A current flows through the coil. What is the flux density?
P KN Refer to the figure. d₁ 0.9 m Force P is 60 kN and each force Q is 125 kN. Q KN Add your answer Integer, decimal, or E notation allowed Q KN The diameter d₁ = 30 mm and diameter d₂ = 50 mm. B d₂ 1.2 m What is the normal stress in rod AB in MPa? Round to the nearest integer and enter the magnitude only. C Gi
1/ Suppose that there are two types of H.V.T.Ls operating at the same voltage and carrying the same current, but one of them with smooth shapewhile the other with standard shape. Which of them, you will choose? a. choosing the smooth one. b. choosing the standard one. c. choosing the one with hollow construction shape. d. all these answers are wrong. 2/ As the ambient temperature in crease the disruptive critical voltage of coron a is: a. Decreased b. Increased c. No effect d. All these answers are wrong. 3/ Using HV underground cable improvevoltageprofile and power factor in any loaded inductive electrical grid because. a. Due to its inductive power effect. b. Due to resistive Effect. c. Due to its capacitive power effect. d. All of the above answers are wrong.