1:11Gamerz4.12 You have been asked to design the pavement foran access highway to a major truck terminal. The designdaily truck traffic consists of the following: 80 singleaxles at 22,500 lb each, 570 tandem axles at 25,000 lbeach, 50 tandem axles at 39,000 Ib each, and 80 tripleaxles at 48,000 lb each. The highway is to be designedwith rigid pavement having a modulus of rupture of 600Ib/in? and a modulus of elasticity of 5 million Ib/in'. Thereliability is to be 95%, the overall standard deviation is0.4, the drainage coefficient is 0.9, APSI is 1.7 (with aTSI of 2.5), and the load transfer coefficient is 3.2. Themodulus of subgrade reaction is 200 lb/in'. If a 20-yeardesign life is to be used, determine the required slabthickness.EditII

Answered: Image /qna-images/answer/d5a32e05-2710-4768-8df1-f70cbe7211f3.jpg

Answered: 4.12 You have been asked to design the…

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

12. Refer to Figure II-1 attached. A flexible pavement is to be evaluated according to the AASHTO 1972 design guide. The existing pavement has a weighted structural number=3.4, a regional factor=2.0, and a soil support value=4.5. What would be the approximated number of daily equivalent 18-kip axles to be allowed on this road for a 20-year analysis period?a. 10b. 33c. 100d. 1490
A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8,000 Ib each, 900 tandem axles at 15,000 lb each, 20 single axles at 40,000 Ib each, and 200 tandem axles at 40,000 Ib each. The highway was designed with 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase. The reliability was 70%, overall standard deviation was 0.5, "PSI was 2.0 (with a TSI of 2.5), and all drainage coefficients were 1.0. What was the soil resilient modulus of the subgrade used in design?
You have been asked to design the pavement for an access highway to a major truck terminal. The design daily truck traffic consists of the following: 80 single axles at 22,500 lb each, 570 tandem axles at 25,000 lb each, 50 tandem axles at 39,000 lb each, and 80 triple axles at 48,000 lb each. The highway is to be designed with rigid pavement having a modulus of rupture of 600 lb/in2 and a modulus of elasticity of 5 million lb/in2. The reliability is to be 95%, the overall standard deviation is 0.4, the drainage coefficient is 0.9, ΔPSI is 1.7 (with a TSI of 2.5), and the load transfer coefficient is 3.2. The modulus of subgrade reaction is 200 lb/in3. If a 20-year design life is to be used, determine the required slab thickness.
2 Describe the basic types of highway concrete pavements and give the conditions underwhich each type will be constructed
A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8,000 lb each, 900 tandem axles at 15,000 lb each, 20 single axles at 40,000 lb each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase. The reliability was 70%, overall standard deviation was 0.5, " PSI was 2.0 (with a TSI of 2.5), and all drainage coefficients were 1.0. What was the soil resilient modulus of the subgrade used in design?
2. You are asked to design a new flexible pavement structure for an existing road that will be totally replaced. You are provided with the following borehole results: a) Existing (Old) HMA - 135 mm b) Existing (Old) Granular A Base - 170 mm c) Existing (Old) Granular B Subbase - 340 mm d) Gravelly Silty Sand (Till) Subgrade (25 % 5-75 um) What is the current GBE for the existing pavement structure? What is the GBE for the same pavement structure when it was newly constructed?
Problem 3. A rigid pavement is to be designed to provide a service life and has an initial PSI of 4.4 and a TSI of 2.5. The modulus of subgrade reaction is determined to be 300 lb/in³. For design, the daily car, pickup truck, and light van traffic is 20,000; and the daily truck traffic consists of 200 passes of single-unit trucks with single and tandem axles, and 410 passes of tractor semi-trailer trucks with single, tandem, and triple axles. The axle weights are cars, pickups, light vans = two 2000-lb single axles (equivalency factor = 0.0002) single-unit trucks = 10,000-lb steering, single axle (equivalency factor = 0.081) = 22,000-lb drive, tandem axle (equivalency factor = 0.305) tractor semi-trailer trucks = 12,000-lb steering, single axle (equivalency factor = 0.1750) = 18,000-lb drive, tandem axle (equivalency factor = 0.132) = 50,000-lb trailer, triple axle (equivalency factor = 3.02)
A flexible pavement is designed to last 10 years to withstand truck traffic that consists only of trucks with two 18-kip single axles. The pavement is designed for a soil CBR of 10, an initial PSI of 5.0, a TSI of 2.5, an overall standard deviation of 0.40 and a reliability of 90%, and the structural number was determined to be 6. On one section of this roadway, beneath an underpass, an engineer uses an 8-inch rigid pavement in an attempt to have it last longer before resurfacing. How many years will this rigid-pavement section last? (Given the same traffic conditions, modulus of rupture = 800 lb/in2, modulus of elasticity = 5,000,000 lb/in2, load transfer coefficient of 3.0 and drainage coefficient of 1.0.).
Using the AASHTO rigid design procedure, design a pavement for a provincial road with an expected design ESAL of 20 x 106. The pavement structure is to consist of Portland cement concrete with an elastic modulus of 5.0 x 106 psi and a modulus of rupture of 550 psi, and a 12 in. thick unbounded granular material as subbase. The pavement is to be plain jointed and jointed reinforced concrete with tied P.C.C. shoulder and having load transfer devices. The climate consists of a wet season (November-April) and a dry season (May-October). Freezing of the subbase and subgrade is considered negligible. The elastic modulus of the subbase is 20,000 psi during the dry season and 15,000 psi during the wet season. The elastic modulus of the subgrade is 6,000 psi during the dry season and 3,500 psi during the wet season. The subgrade depth to the bedrock is 5ft. It is estimated that it will take a day for water to drain from the pavement and that the pavement will be saturated about 20 percent of…
You have been asked to design a flexible pavement and the following daily traffic is expected for design: 6375 passenger cars with two 2-kip single axles, 375 18-wheel trucks with one 12-kip single axle and two 32-kip tandem axles, 225 triple-trailer trucks with one 18-kip single axle and six 36-kip tandem axles, and 525 single unit trucks with one 10-kip single axle and one 24-kip tandem axle. There are 3 lanes in the design direction (conservative design is to be used). Assuming a structural number of 5.0, determine the design-lane 18-kip ESALs for the pavement projected 15-year design life with the TSI of 2.5.
A flexible pavement is designed to last 10 years to withstand truck traffic that consists only of trucks with two 18-kip single axles. The pavement is designed for a soil CBR of 10, an initial PSI of 5.0, a TSI of 2.5, an overall standard deviation of 0.40 and a reliability of 90%, and the structural number was determined to be 6. Determine the number of daily trucks traveling in the peak direction. 150,814 B 75,407 C) 37,704 18,852
Write the significance of each layer of flexible pavement in a single line. B) Describe the one most important factor of causing failure of highway subgrade

SEE MORE QUESTIONS

Recommended textbooks for you

Structural Analysis

Civil Engineering

ISBN:

9781337630931

Author:

KASSIMALI, Aslam.

Publisher:

Cengage,

Structural Analysis (10th Edition)

Civil Engineering

ISBN:

9780134610672

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Principles of Foundation Engineering (MindTap Cou…

Civil Engineering

ISBN:

9781337705028

Author:

Braja M. Das, Nagaratnam Sivakugan

Publisher:

Cengage Learning

Structural Analysis

Civil Engineering

ISBN:

9781337630931

Author:

KASSIMALI, Aslam.

Publisher:

Cengage,

Structural Analysis (10th Edition)

Civil Engineering

ISBN:

9780134610672

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Principles of Foundation Engineering (MindTap Cou…

Civil Engineering

ISBN:

9781337705028

Author:

Braja M. Das, Nagaratnam Sivakugan

Publisher:

Cengage Learning

Fundamentals of Structural Analysis

Civil Engineering

ISBN:

9780073398006

Author:

Kenneth M. Leet Emeritus, Chia-Ming Uang, Joel Lanning

Publisher:

McGraw-Hill Education

Sustainable Energy

Civil Engineering

ISBN:

9781337551663

Author:

DUNLAP, Richard A.

Publisher:

Cengage,

Traffic and Highway Engineering

Civil Engineering

ISBN:

9781305156241

Author:

Garber, Nicholas J.

Publisher:

Cengage Learning

SEE MORE TEXTBOOKS